Oh the perks of being a CEO:) Watch as Carlos Ghosn takes an amazing tour of the Zama Heritage Facility in Japan:

Our fellow roadster owner and friend Victor Laury unfortunately has faced serious health issues so please read the flyer below to see how you can help him AND have the chance to own a stunning Datsun 2000 Roadster!

To donate/enter please fill out this form: VicEntry
Download a full pdf of this flyer to read more details/specifications about the roadster HERE. You can also view the car April 28/29 at the Datsun Roadster Show in Solvang, CA and Motorsport Auto Show

We are only 7 days away from the big show! Prep those cars and book those hotels!
It’s that time of the year again when the largest group of Datsun Roadsters gathers in the beautiful town of Solvang, CA. Come check out roadsters and other vintage Datsuns April 27/28, details below:
Last Year’s Show Report

Word on the street is that Infiniti will release a 530-hp G37 to compete with current powerhouses from Mercedes and BMW. You can read more about it and Nissan’s future offerings on MotorTrend and
Autoblog.

How will Infiniti price this new “Super G”? Will Nissan actually release a car that could potentially cut into GT-R sales? Or is this the beginning of a new image for the “IPL” branding?

Every so often, a new challenge materializes at Z Car Garage.

Nissan has been quietly developing its continuously variable transmission (CVT), which began with the Murano in 2003 and is now available across many of its models. With the kinks worked out in the early Muranos, the CVT roars at red-line as you punch the throttle and does not let up. And when an opportunity appears to tune a Nissan Altima 3.5 SE CVT Coupe, how can one resist?

At first glance, the Altima Coupe looks like the offspring of the Altima sedan and the G35 coupe. The front bears resemblance of the sedan, and has the rear of an Infiniti. Unlike the Altima sedan, the coupe has a shorter wheelbase and shaves off a few pounds. And the Altima Coupe, like its sedan parent, comes in two flavors: the 2.5 (QR25DE engine) and the 3.5 (VQ35DE), the latter of which develops 270hp.

One weakness of the CVT are its belts, which were known for some time to be intolerant of high temperatures and high torque. Fortunately, Nissan developed a much stronger belt system in the 3.5 model and it has proved its durability time and time again.

When Alex of Santa Clara brought up the idea of tuning his CVT Coupe, we knew that we were about to venture into uncharted waters. The VQ35 with a CVT posed an ominous challenge to tune, let alone dyno accurately.

Before we began, we had to prove that we could consistently dyno the car. Although the transmission has a manual mode, the gear ratios still varied within each gear. Across the web, the word was that a CVT cannot be dynoed. It seemed almost like an accepted fact. But we can now confidently say yes – it can be dynoed, although there is peculiar behavior, which cannot be ignored. This includes the transmission’s attempted to down-shift at full throttle and upshift just short of red-line. Despite this, with a little patience and great finesse, Rob and Josh found a technique to get consistent runs in 4th gear. Once we knew that it could be dynoed consistently, there was no looking back.

The Coupe entered the shop with one performance mod: an axle-back Borla exhaust. Our baseline for the tune was 212.24 hp at the wheels and 214.31 ft/lb of torque.
Here is a video clip of a dyno run:

Before we began the tune, we started by installing a K&N intake. The K&N air filter provides more surface area and better air-flow over the stock intake. Although no longer enclosed, the heatshield still mates with the stock air duct to deliver cold air from the outside. The overall gains from the intake were minimal at first. On its own, the intake actually caused a loss in performance in the low-end of the power-band, with some gains between 4,800 and 6,000 RPM.

The next step was to install Racingline’s Y-Pipe. The after-market y-pipe is far less restrictive that the stock y-pipe. Imagine taking a deep breath when you are winded, and then trying to whistle the air back out. It’s not a very effective way of delivering oxygen to your body; you’ll be left with a lot of CO2 in your lungs as you try to get new oxygen.

We knew that we might not see significant benefits from the intake until we freed up the exhaust. After the y-pipe install and a dyno run, we found a gain of approximately 6.5hp and 6.5 ft/lb of torque throughout the entire band.

Acceleration in the lower range was important, and the power was still lagging. Now it was time to bring everything together with UpRev. With a keen eye, Rob manipulated the cam timing and the air-fuel ratios to bring the entire power-band up, especially the low-end torque. The tune itself gave us an extra 2hp and 2ft/lb of torque.

The engine made 200+ ft/lb of torque at 2,400RPM and beyond. At the end of the day, we were left with 221.22 hp at the wheels and 223.78 ft/lb of torque (SAE 5).

The gains were modest for a first attempt, but we made it out in one piece. How awesome it was.