Dear Zcarblog readers, it’s been a busy year and we are catching up on blog posts. Please enjoy our belated race report from November 2023.

WE LOVE RACING! On November 10-12 we attended the Velocity Invitational at Sonoma Raceway. Z Car Garage had a blast racing and supporting clients in Group 6 (1968 – 1978 IMSA GT Cars), Group 9 (ALMS) and Group 10 (Mini vs Mustang Enduro). This vintage racing event was just as fun for spectators with a friendly, immersive vibe. Enjoy our report from the weekend with photos and in-car video of the action.

Z Car Garage Racers

 

#49 IMSA Joel Anderson GTU Z

Rob Fuller piloted the #49 Joel Anderson IMSA GTU Datsun 240Z

 

Porsche 997 GT3 Cup

This very special Porsche is the 2006 FIA European GT3 Championship winning car that was driven by Sean Edwards. It is a 997 GT3 Cup S Prototype and our client Kenny Tse raced it in Group 9 (ALMS). Listen to this car on the Z Car Garage dyno below!

#78 IMSA Porsche 911

 

Z Car Garage prepared and provided trackside race support for our client Kelvin Tse and his IMSA Porsche 911, running with the Z cars in Group 6.

Mini Vs Mustang Enduro

Rob Fuller and Greg Hoff raced a Mini Cooper against Mustangs in the Group 10: 1960’s Mini Vs Mustang Enduro, this was an action-packed group!

  

Race car driver, restorer and Datsun Historian Glenn Chiou raced his FAR Performance 240Z. This Z has a very rich racing history, driven in the 70’s by Loren St. Lawrence in VIPS Restaurant livery.

 

Racing With Group 6 IMSA

Photo by Chris Constantine

Group 6’s IMSA cars were dominated by big-power Porsche 911 RSRs with a few BMS CSLs and four S30 Datsuns. Rob Fuller ran the #49 Joel Anderson IMSA GTU Datsun 240Z joining Dave Stone’s 260Z, Gary Cook’s CP 240Z and Glenn Chiou’s’ 240Z:

 

#49 IMSA Joel Anderson GTU Z

 

This was Z Car Garage’s third time running the Velocity Invitational event. Enjoy Rob Fuller’s race report with video below…

ROB: “The IMSA GTU Z made a switch this season from Avon to Goodyear tires, and it’s really been quite amazing. You have to remember that all of the suspension on this 240Z is what Joel ran in 1981, and it still rocks. Group 6 was fun and I was in the mix with legends…spent the last 20 years attending the Historics watching Bruce Canepa in his Porsche 935, Ken Epsman in his DeKon Monza, the Greenwood Corvette…just unreal to be actually racing with them!”

 

ROB: “My personal best lap time was 1:46 and I think that is the highest finishing Datsun 240z ever in that group. Shoutout to Glenn Chiou in the BADD Z he kicked some ass, Gary Cook brought out an old CP car and Dave Stone was in his GTU 260Z.”

Enjoy these shots of the #49 car in action by photographers Kris Poulin, Chris Constantine and Charles Frerking:

   

Video!

We have in-car video from Rob in the Joel Anderson IMSA GTU 240Z and Group 6 racing action below, volume up and enjoy!

Sunday Race:

Catch some Turn 2 action HERE and watch more of Rob’s racing adventures on his YouTube Channel.

 

Z Car Garage Trackside Race Support Services

ROB: “ZCG provided trackside support for 4 cars. Kelvin in IMSA 911 and myself in G6, Kenny in G9 ALMS with a bunch of 996/997 Porsche Cup cars, Ford GT’s and really cool metal. They all had a blast. We changed up a few things on the IMSA 911 and solve some issues that came up at Rennsport so he was able to have a good time at Velocity.”

 

Kenny with his 997 GT3 Cup car and first time on track since 2018. Z Car Garage prepped the car with fluids and dyno tuning, and wow what a car:

 

ZCG is always willing to lend a hand to fellow racers, like Dave Stone:

 

Mini Vs Mustang Enduro

 

ROB: “We also ran a Mini with Greg Hoff in the Enduro. The Mini kicked our ass all weekend and we had to do an engine swap (thanks to Nick for the assist!)…we had electrical woes. British Steel really challenged us and thanks to the ZCG crew we were able to catch the last Enduro race and take the checkered flag.”

 

Paddock Action

Enjoy this video highlighting the Sonoma Raceway paddock with race group walk-throughs, engine sounds and more:

Exotic cars

 

There was no shortage of rare and exotic cars from well-known and upcoming supercar marques. Guntherwerks had their 911 Speedster and McLaren showed off an incredible display of F1s mixed with newer models:

 

Privateer Spirit

Our friend and Datsun Historian Glenn Chiou raced his FAR Performance 240Z. It’s worth noting that not unlike privateers of the period, Glenn builds his race cars, maintains and manages racing efforts himself. Not an easy task so we applaud his work ethic. Glenn builds some beautiful Datsuns and we will highlight his B-Sedan 510 soon!

 

A Fan-Friendly Race Event

 

Formerly known as the Sonoma Speed Festival (2019), the Velocity Invitational re-imagined the vintage race experience with a Goodwood-inspired vibe that we enjoyed at the 2022 Velocity Invitational. One of the best experiences for spectators is the paddock and organizers made access to drivers and their machines seamless. Fans could get up close and personal with race cars without the typical ropes or 45-foot RVs in the way:

 

ROB: “First time running at Sonoma for us with VI, since we missed the inaugural event in 2019. Jeff O’Neill ‘s event is first class and reminds us of what the Rolex MMR used to be. So much excitement in the air…when you drive in people would be everywhere. Thanks to Jeff, Ryan Turri and Ardelle Lind for accommodating our needs.”

 

“They have done an incredible job making the guests and fans welcome. Organizers created a memorable experience, down to the driver’s meeting and we really enjoyed the paddock design, signage, F1 energy. All three days there were lines to get into the event! More driver amenities like the lounge, food and drink…ZCG’s first shop helper Jeff Garcia and his company was in charge of coffee/drink services at the event, small world!”

 

The hot pit area where all run groups stage before heading out to the track is an amazing place to be. Typically, access is only granted to pit crews and media. At the Velocity Invitational however, organizers staged a “false grid” where any spectator could walk amongst the race cars.

  

If you want to see action from the event in its entirety, check out Goodwood’s live streaming coverage of Day one and Day Two. Huge thanks to Meghan Fuller for capturing photos/videos for ZCG. More photos in the gallery below!

ZCG Race Crew

 

Huge shoutout to the Z Car Garage race crew including Josh, Meghan, Nick and Cooper. We are grateful for your support, keeping us safe and on the track!

   

Racing into 2024!

 

Thank you Velocity Invitational for an incredible event. We look forward to running with you again. Join us for the 2024 race season starting March 1 with SVRA at Thunderhill. See the ull race schedule below and LONG LIVE THE Z!

 

…[read more]

 

Our Z Car Garage Big Brakes have been winning over Z-car enthusiasts locally and globally. Jason purchased a set for his 1974 Datsun 260Z and performed the installation himself. Before we go into his Big-Brake experience let’s hear his Z-story…

 

JASON: “I first heard about Z Car Garage by following Larry Chen’s 240z build on his YouTube Channel. I saw his various interviews with Rob Fuller and was really impressed with his knowledge and passion for the Datsun 510 and s30 chassis. Quickly, I started researching more about the pain points of the s30’s, and noted the lack of support from many other companies in the area of suspension and braking locally. The kits available were Wilwood, Endless, Star Road, among others. No complete kits that were torture tested and raced like what Z Car Garage was doing with their ZCG CV Axles , Brake Kits and other components they were selling. Research and development are key to me, and I was thrilled to see ZCG taking this on themselves. In addition, Rob is a real human being who’s on top of answering questions via email and in person at Z car events. That’s a HUGE deal to me, and it’s so rare to meet someone that of course is just as passionate about his cars as the enthusiasts building them.”

 

“My 1974 Datsun 260z is an Early model s30. When I purchased it, a few years ago I quickly removed the stock seats and reupholstered Recaro LX vintage seats in Black. I loved the netted headrest, and the clean recaro stitching at the center of the seat. I also removed the Greddy Oni wheel that was originally in the car and swapped it out with a new old stock Nardi Nismo Deep steering wheel with a Black and Gold finish. I went through the interior and purchased a NOS Datsun center console, and replaced the stock door cards with Skillard flat cards with leather pull straps.”

 

“In addition to the door cards, I added Skillard powder coated heel plates. The car came with BC adjustable coil-overs and Swift Springs which I will be updating in the near future. The BC Coilovers are perfectly fine for the street applications I’m using the car for currently. My suspension underneath the car is the full T3 catalog including the power cradle, control arms, bushings, and even their steering elements. It’s finally sorted, and I really enjoy driving the car the way it currently feels.”

 

“The car is equipped with a L28, ZX 5 Speed transmission, and 44pHH Mikuni triple carbs built by Taka at Kyusha House. The header and exhaust system are Fujitsubo Legalis R. The engine has since been updated in every way from the ignition system, oil pump, spark plug cables, and brake new seals and belt. The oil pan was replaced with a Moroso baffled racing pan with higher oil capacity.” 

  

“I have two sets of wheels and tires for the car. One set is Volk Racing TE37v custom gold 15×9 at 0 offset on Toyo Proxes R888 205/50/15, and the other set is Work Racing Equip 03 15×8.5 at -3 offset custom bronzed lip, and Gold Center on Falken Azenis RT660 205/50/15. The front bumper is a carbon MSA, and the rear tail light bezels are carbon fiber made by Vintage Carbon. The wing is a Carbon Fiber BRE spoiler.”

 

You can see Jason’s Z in action in the video below:

 

Z Car Garage Big-Brakes

  

As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel and retaining factory emergency brake lever! A few details below:

Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)

Rotors: 280mm x 20.6 with Alum 7075 hats

Pads: Stoptech 309 sport street pads

Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.

  

Big-Brake Kits Available For DIY Install!

Z Car Garage is proud to offer our Big-Brake Kit to Z-Car owners that want to perform the installation themselves. We can ship worldwide and each kit contains everything needed with a comprehensive (40-page) installation guide. Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE. Enjoy these pictures of Jason’s beautiful S30 and his ZCG Big-Brake installation:

 

Our ZCG Big-Brake kit ships with everything needed to install and retains the factory parking brake function. Jason successfully installed the BBK on his Z with PitstopMotorTuning, and they look great behind both the Work Equip 03 and Volk TE37 wheels:

    

Beyond ease of installation and quality components, our Big-Brakes perform by offering superb pedal feel…everyone that drives our demo Z confirms! This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. Jason shares his feedback after replacing his existing Wilwood brakes with the ZCG BBK:

JASON: “The Stoptech ZCG Big-Brakes are really a solid kit. The lead time was pretty rough, but again Rob reassured me every month over the course of a year of waiting that it would be worth it. He was right! These brakes do not disappoint. Once the kit was completely bedded and broken in, I quickly put the brakes to the test on Angeles Crest highway here in Los Angeles. I know this road well, and that’s where I usually push the car at a safe limit, and see where the pain points lie. The ZCG brakes are worth every penny. They are precise, they are confidence inspiring, and also feel great under late braking situations. I had a blast carving around the canyon knowing my brakes would safely hold up. My next test would be to get a couple of track days on them, and see how they hold up under extreme conditions and multiple sessions.”

 
What’s in store for Jason’s Z?

“The goal for the 260z is to refine my current setup. The paint is a bit rough since it was a garage paint job, and I would love to repaint the whole car including the interior. At the moment, I’m building a high compression 3.1L stroker motor with Jenvey 50mm ITB being managed by a Haltech Elite 750 stand alone ECU. My goals long term are for big power, but with street car reliability. I would love to confidently do a track day, but also be comfortable driving my wife to car shows, and even to grab a cup of coffee together. The engine has a custom designed valve cover designed by myself, and commissioned to be created by BSpeed in New Zealand. Big updates to come in the new year!”

 

Thanks for your support Jason we love that you are Enjoying The Ride and Long Live The Z! More photos in the gallery below

The Last Stop in Braking for your Z

 

Z Car Garage Big Brakes are one of the best systems available for your S30 Z Car with over 200 kits sold worldwide and unanimous positive feedback. See our ZCG Big-Brakes on client cars HERE and enjoy the photos below:

    …[read more]

Our client Randy Jaffe is selling his 1974 Datsun 260Z with 48K original miles. It is a rare Metallic Green (Datsun paint code 303) exterior color with tan interior and factory A/C. The engine and chassis are stock, untouched with factory markings and 4-speed manual transmission:

 

For pricing and additional phots/details please visit our FOR SALE page

 

We have great news for clients that have purchased our Z Car Garage Big Brakes. Happy to report that the product is now in-house and we will begin fulfilling all backorders in the next coming weeks. We sincerely apologize for the delay in what is quite possibly the world’s longest back order. Thank you all for your patience, believing in us and supporting ZCG.

 

The Last Stop in Braking for your Z

 

Z Car Garage Big Brakes are one of the best systems available for your S30 Z Car with over 200 kits sold worldwide and unanimous positive feedback. See our ZCG Big-Brakes on client cars HERE and enjoy the photos below:

    

The JDM Legends Safari Gold Datsun 240Z features our Z Car Garage Big-Brakes:

 

CJ’s 1971 Datsun 240Z features our Z Car Garage Big-Brakes:

 

Jay’s 1972 Datsun 240Z features our Z Car Garage Big-Brakes:

 

What sparked your interest in Z Cars? For Scott W it began when he was about 15 years old, and eventually led him to Z Car Garage:

“My best friend’s brother’s friend had a silver 240z. He would take us to lunch and we had to lay down in the back. From that time on I wanted a Z! I started reviewing zcarblog.com and found a very nice 260z for sale that was owned by an older retired couple. Based on all the work performed by ZCG I met with Rob and I purchased it. The 260z was originally gold with the 5mph bumpers.”

 

Indeed the gold 1974 260z was our very own customer Geri R’s. When she retired and moved to San Diego she told Rob, “If you are not in SD my Z car can’t come with me…please find it a new home.” Scott W visited ZCG in 2013 and purchased the Z, well before the S30’s garnered high prices! He had a very clear vision of building the ultimate Z Car:

“I told Rob my plan was a car that was great to look at but I’m going to drive it! And drive it hard. My goal was to keep it looking 1974-ish on the outside but modern under the skin.”

So we began the process of upgrading an already solid, clean chassis that Geri lovingly maintained.

Drivetrain

The first item we discussed was the engine. Scott wanted more power and Rob suggested a Rebello 3.2L Stroker engine. Supporting parts included an MSA 6-into-1 header,  ZCG exhaust system, KOYO race radiator (custom upper hose) and ZCG heat shield. A few pictures of the engine build/installation with many more in the gallery:

 

Induction is handled by Jenvey individual throttle-body fuel injection, managed by a Haltech Elite 750 standalone system.

 

A NISMO Competition oil pan was installed to cope with high cornering loads from road course driving. Also shown is the Nissan 240sx 5-speed transmission. This “KA24” unit is significantly stronger than early S30 transmissions. It handles the 3.2L’s extra power, and we offer this conversion to customers.

 

When we upgrade the transmission we also install a JWT HD clutch with aluminum flywheel. Helping put the power down efficiently is an OS Giken LSD. The R180 houses a 4.11 R&P and the assembly is setup in-house (by Joshua Corwin). Rounding out the drivetrain upgrades are a set of ZCG CV Axles(shown below)

 

The ZCG Exhaust system using 2.5″ piping to a stainless resonator and Magnaflow muffler with slash-cut tip. Listen to the sound in the video below!

   

The completed engine bay. All hoses, hydraulic lines, fittings etc were removed and restored/replaced with new parts. Zinc plating hardware throughout:

 

On the dyno, Rob tuned the Z with the Haltech making 257hp/229tq to the wheels. An improvement from the stock 121hp/130tq:

Chassis

 

Suspension upgrades were next, focusing on the ideal setup for open track days while remaining comfortable on the street. Scott outgrew the Tokico 5-ways and now has Koni Yellows with our Ground Control coil-over setup from back in the day. Techno Toy Tuning control arms, T/C rods and more complement the total suspension restoration. All parts were powdercoated and hardware plated.  We really appreciate Gabriel at T3 and his staff. They make some of the best suspension parts out there for Z cars.

 

Panasport Wheels

 

Custom sized 17×9 Panasport C8 wheels allow us to run a wide 255/40/17 tire at all four corners, without flaring the fenders:

 

Bridgestone RE-71R tires are shown below. The 17″ diameter wheels also give clearance for our ZCG Big Brakes!

  

ZCG Big-Brakes and CV Axles

After driving our customer Lou’s Fairlady, Scott was sold on our Z Car Garage Big-Brakes.

  

Not to be confused with our familiar Z Car Garage Big-Brakes (for small wheels) that we currently offer, this Big-Brake kit was our initial setup from many years ago. Our first collaboration with Stoptech, this 328mm sized kit requires 17″ diameter wheels and the massive ST-42 calipers are finished in bright red. This kit was installed on our OS Giken TC24-powered 240z and a few other customer cars.

 

 

The ZCG Big-Brakes framed nicely behind the black-spoked C8s. We are currently re-vamping this kit using Stoptech’s latest ST-43 caliper.

    

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 70 CV axle kits on customer cars and we are stoked with all of the positive feedback.

   

Scott’s 260z received ZCG CV Axles set #250

  

More pictures of the ZCG axles installed, also visible are the T3 control arms and ZCG exhaust system:

  

Comfort

 

Scott’s 260z had an interior in fair shape. We gave it the full ZCG treatment with a refurbished dash, new carpet and creature comforts like Bluetooth, radar detection and functioning HVAC. In-progress shots below with more in the gallery:

 

New carpet throughout, integrated speaker box in hatch:

 

The stock seats were in bad shape Scott was sliding around on them so we upgraded to leather Recaros. Perfect for keeping him locked in place during track days.

 

The heater system from core to blower was completely restored:

 

Full A/C setup using a smaller Toyota compressor with existing A/C parts:

 

Performance

 

Balance. This Z has power and the chassis upgrades to transform it into a well-rounded sports car. Remember Scott’s goal of building the Z to drive really hard? He has been taking his S30 to Buttonwillow Raceway every month, putting our ZCG products to the test on the track.

 

Enjoy the sounds of Scott’s Z in this short video below:

 

 

Exterior

 

You didn’t think we would forget to mention the total paint color change, did you?  About six months into his build Scott called to request a color change from gold to a Mercedes-Benz shade of Gun Metal. Our man William painted the body, retaining all side-markers to maintain a stock look:

 

Scott however was adamant about changing the stock impact bumpers. Rob located Euro-style 240z bumpers and had them sectioned/re-chromed:

 

Thank you Scott for letting us build your Ultimate Z Car! We are proud to see you enjoy it on the track and street.

LONG LIVE THE Z!

More pictures in the gallery below!
…[read more]