
Scott is still on the road and currently on the East coast enjoying some beautiful Fall colors. Follow his blog chronicling his travels at http://www.roadsterroadtrip.com/
Shop Talk for
|
|||
![]() |
|
||

Scott is still on the road and currently on the East coast enjoying some beautiful Fall colors. Follow his blog chronicling his travels at http://www.roadsterroadtrip.com/

Kunal J is the owner of this very sexy G35 coupe with Volk TE37s wheels and tasteful ride height. He came to ZCG for brake services, ART pipes and an UPREV dyno tune. We happily installed brake parts that Kunal brought in himself and replenished the clutch hydraulics:







Rob UPREV tuned the G and gained 16hp/4tq for a total of 278hp/261tq to the wheels. The dyno shows improvements throughout the entire rev range:



Chris B is a long time ZCG customer and we have been with him through various stages of his build. Affectionately called “Lucy”, this beautiful G35 coupe has won numerous awards at shows including Hot Import Nights. Chris fanatically detailed the engine bay with polished and stainless parts abound. Even the Cosworth intake manifold was customized with candy-red carbon fiber to match the valve covers and huge Brembo calipers at all 4 corners.


Low compression in one cylinder and a feeling that he’d reached the limits of the Vortech supercharger sparked a call to ZCG. Rob and Chris discussed the next stage of boost for Lucy and it would be in the form of two turbos courtesy of a GTM Stage 2 kit! Parts arrived and the drivetrain was removed.


The built VQ was re-assembled with care and attention to detail considering how Chris insanely polished parts like the entire front end.



Behold the shine. Once you start polishing it is hard to stop!


With the engine buttoned down the GTM twin-turbo kit was installed. Note details like the manifold heat shields and insulation protecting oil/wiring lines near downpipes. The fresh GTM stage 4 automatic transmission is a prudent upgrade to handle big power:



Twin-turbo VQ, welcome home!


Polished hot/cold pipes feed the GTM FMIC:



Rob’s conservative 91 octane tune yielded 450hp/421tq to the wheels. More power to come!

We love working with Chris and look forward to turning up the wick when the urge arises! Enjoy the boost and that wonderful engine bay!


Robert C purchased a Vortech supercharger kit and started looking for a shop to install it for him. When we got the call from Robert we happily obliged to take his G35 Coupe to the next level! Here is the V3 kit awaiting installation:





FMIC and GTM 25-row oil cooler:



We also installed a Motordyne plenum spacer, Whiteline lower control arm bushings, changed tranny/diff fluids, and did some general clean-up…



“Rob just wanted to reiterate how incredible the car is. You guys do a great job. I had no idea the car would be that strong yet tame as it was before the install.
I have been nothing but a grin from ear to ear for hours now.”
Enjoy The Ride, Robert!


Due to a City Tech Auto Body track day at Mazda Raceway Laguna Seca we missed the practice day on Saturday. Arriving on Sunday early morning we completed the check up, tech, registration and temperature was rising to 77 degrees right before our first session.
Auto Club Speedway is known to put a lot of stress on the motor because of the NASCAR banking at high speed. Our Z hit 5th gear, full throttle, 6k+ rpm on the bank over 140mph. During the first time attack session, our Z was able to keep the oil temperature just about 200F through out the whole session at around 82 degree ambient temperature. However, during the 2nd session ambient temperature rose up to 100F+. We saw many M3, STi and highly modified cars forced to pit after the 2nd lap. Despite the high heat, we managed to finish the full session and oil temperature reached 260F right before the checker flag.


Keep up the superb driving Patrick and thank you for letting ZCG work on your Time Attack Z!