Supermachine purchased and installed our Z Car Garage Big-Brakes (for small wheels), complete with parking brake. They added a custom touch to the Stoptech calipers too:
As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel and retaining factory emergency brake lever! A few details below:
Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)
Rotors: 280mm x 20.6 with Alum 7075 hats
Pads: Stoptech 309 sport street pads
Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.
A few closer detail shots of the calipers, rotors and hardware:
ZCG CV Axles
Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. These are 100% bolt-in replacing your half-shafts and does not use aluminum adapters commonly found in aftermarket units. We have over 150+ CV axle kits on customer cars and we are stoked with all of the positive feedback.
Supermachine installed a set of our ZCG CV Axles, including a photo of the factory half shafts for comparison:
Over 150 sets of our ZCG CV Axles are installed in client’s cars all over the world. For more information please visit our detailed post our HERE. Below are just a few examples of race cars running out CV Axles:
Race car driver, restorer and Datsun Historian Glenn Chiou is running our ZCG CV Axles in this IMSA GTU 260z race car!
Racer Brad H is running ZCG CV Axles in his IMSA GTU race car:
Race car driver and restoration specialist Jim Froula of Racecraft is running ZCG axles in several of his cars:
Set #246 – installed May 2018 on the “Harry Stewart #52” Datsun 510:
Set #247 – installed April 2018 on the 260z
Set #248 – installed on Adam Carolla’s “Greg Sorrentino #90” Datsun 510.
Thank you for your support Supermachine! We are proud to be a part of your build with solid parts choices like the Jenvey ITB EFI-fed L28 with Kameari header, Haltech ECU, Sachs coil-overs and Techno Toy Tuning suspension.
Can’t wait for the finished product. You can see more of this build on Instagram. Long Live The Z!
Z Car Garage is excited to collaborate with Datsunworks and develop their brilliant KN20 dual-overhead cam (DOHC) cylinder head designed for the Nissan inline-6 L-Series engine. This is a Honda K-series derived cylinder head with superior flow rates and modern valvetrain components effectively transforming your SOHC L-series into a high-revving DOHC engine.
We have installed the Datsunworks head into our client Gary’s Datsun 240Z (affectionately called the “Behemoth”) and it is currently in the tuning/testing stage. In conservative tune it made 350hp/248tq at the wheels. Recently we joined photographer Naveed Yousufzai at a photoshoot for full feature on Marqued.com. Check out the story and amazing photos by Naveed with amazing shots at Marqued HERE.
The photo shoot left us breathless and we really appreciate how the small details are captured like the Behmoth’s integrated roll cage, Recaro seats, 6-speed shift knob and 10krpm tach…check out the feature!
This video shows behind the scenes action of the photoshoot for Marqued.com. I tried to capture the incredible induction sound the KN20 creates. For the first time we cruised on the freeway together with the Behemoth…it was the “trifecta” with 240Z, 510 and Datsun Roadster. Turn up those speakers and enjoy!
For more information (and video) on the KN20 and visit our previous post HERE
David O. has been a Z Car Garage client since 2005. Together, we helped achieve his vision of a fully restored S30 with multi-dimensional performance: a daily driver that is equally adept at canyon runs and open track events. 17 years later David is still Enjoying the Ride and recently visited us for track day preparation.
Before we get into the build details dating back to 2005, let’s hear from David on his recent track day experience.
Take it to the Track!
David is an avid motorsports fan and driver. The Z has seen many track days since the restoration and came out of storage so he visited Z Car Garage for a pre-inspection.
We bled the brakes and made sure everything was ready for the event. He had a great time:
“It was my first time back on the track with the 240z in several years. I went out for half a day with Hagerty Insurance and their affiliation with SCCA’s Track Night in America. The people were great and it was a very “docile” track day with mandatory point-by’s even in the advanced group. It was a great way to knock the rust off after a few years off the track.”
“Rob Fuller prepped the car a few days before and she behaved beautifully. I managed a 1:59 lap but I was lifting a bit going up to turn six because I was afraid of breaking the 90dB sound limit. Of course, Z-Car got a lot of love from the other attendees. :-)”
Enjoy this video of David’s Z in action with in-car and chase footage from Laguna Seca and more:
History
We met David and his newly acquired Z in 2005. Long before the days of Facebook and Instagram, our mutual friend and Datsun fanatic Tom Dockery referred David to ZCG:
“I’ve been working with Rob since February of 2005 when I purchased my 240z from a guy in Redding. It was a true barn car. He drove it down and Rob inspected it before I bought it. I didn’t know anything about the car except that I wanted something fun to drive with a manual transmission. I’d always thought the 240z was cool because my 5th and 6th grade teacher had one – and she was very cool.”
“The first weekend I had the car it rained really hard and I found out all the seals were useless. There was about a quarter inch of water in the car and mold had already started growing. I took it to Rob, and once the seats were out, and the carpet was out, and the seals were in, Rob suggested the Recaro seats, the roll bar, and harness. It was just about that time I did my first track day in someone else’s car, and I decided I wanted to track the 240z. And that’s when I started what I call the “accidental restoration.”
Paint/Body
While we do not have in-progress photos of the restoration, there are many shots of David enjoying the finished restoration. Our man William worked his magic to apply the Nissan 112 Paint (Tennis Ball Green). David recalls his vision for the Z:
“My goal when restoring was to have a track-ready, fun to drive machine that did justice to the original car. My car was originally orange, was red when I purchased it, but I wanted something different. That’s when I went with the tennis ball green color, which was one of the original colors. It was manufactured in October of 1971, so she turned 50 just last fall.”
Engine
Full engine bay services included re-plating and powdercoating parts. The L24 was replaced with factory-spec L28 with triple-Mikuni induction. A custom cam was designed by Rob for better top-end performance. The Z put down 167hp/174tq at the wheels on the ZCG dyno:
Interior
There’s very little on the car that was left untouched – David took pride in the interior:
“I pretty much went with Rob’s suggestions (pros and cons) and learned while I went along. The gauges were all me. As much as I liked the originals, the were just too dim and difficult to read at night. I replaced them with white-backed Autometer gauges but kept the green backlighting. I also kept the original turn signals and embedded them in the new gauges. I didn’t keep the clock, and the fuel gauge is the carbon fiber reinforced glove box.”
More details like Recaro seats, Roll bar with 5-point harnesses, updated fuse box and high voltage bypass for the steering column, 260z lighted console panel and Sony bluetooth radio. Outside, Euro tail lights with LEDs:
Z Car Garage Big-Brakes
David’s Z was the first one to receive our Z Car Garage Big-Brakes. This was our initial (2008) setup utilizing Stoptech ST-40 calipers and our own brackets. We had extensive track testing with pro-driver David Ray:
We have Enjoyed the Ride with David at many events over the last 17 years. Most recently I got to catch up with him at our New Nissan Z event. His Z still looks amaZing!
Here are few events from years ago with David…some of you might remember attending these too!
2008 ZONC Blackhawk Museum Car Show
2010 and 2011 Palo Alto Concours d’ Elegance – the crowd loved his Z car!
2008 Motoring J Style…remember we had a superb turnout for the caravan starting at Z Car Garage!
2008 and 2011 Silicon Valley Auto Show at the San Jose Convention Center
Long Live The Z!
Thank you David for your support and friendship all these years. We love that you keep your Z on the road and it makes you smile behind the wheel whether its on the track or or street. Stay tuned as David will be returning to ZCG later this year for 3.1L engine upgrade! More pictures in the gallery below… …[read more]
We love to see our parts installed and used on client’s cars. Race car driver and restoration specialist Jim Froula of Racecraft is running our ZCG CV Axles in this Nissan IMSA GTU 300ZX race car!
Jim installed CV Axle set #269:
The George Alderman Z31
Over a 49-year competitive career, George Alderman was one of America’s most successful sports car drivers, racing in Sports Car Club of America (SCCA) and International Motor Sports Association (IMSA) events.
In the 60’s and 70’s George would race a variety of cars. He won the IMSA Baby Grand championship in 1971 in a Datsun 510 and in the 80’s he drove Z cars in the Camel GT series. His Z31 would run both turbo and NA classes for IMSA.
Out of 70 starts he had 50 top-tens, 27 top-fives, and 5 wins, all while successfully running his Datsun/Nissan franchise. (Below) a 1988 promotional photo of the Z31 in front of Alderman Nissan, in V6 IMSA GTU class trim. Find more history on this Z as documented on Alderman Machine.
Restoration at Racecraft
Jim and the RacecraftNW crew restored the George Alderman 300ZX. As usual, Froula’s painstaking efforts and diligence result in a faithful restoration. Original frame (left) and restored with chassis parts:
ITB induction on the NA VG30E powerplant:
Bodywork going on, and look at those Panasport C8 wheels!
Thanks for your support Jim! We are excited to see the Z31 back on on the track.
Z Car Garage CV Axles
Over 150 sets of our ZCG CV Axles are installed in client’s cars all over the world. For more information please visit our detailed post our HERE. Below are just a few examples of race cars running out CV Axles:
Race car driver and restoration specialist Jim Froula of Racecraft is running ZCG axles in several of his cars:
Set #246 – installed May 2018 on the “Harry Stewart #52” Datsun 510:
Set #247 – installed April 2018 on the 260z
Set #248 – installed on Adam Carolla’s “Greg Sorrentino #90” Datsun 510.
Last Friday we made some glorious L-Series music with two of our client’s Datsun 240Z cars. Gary’s Datsun 240Z, affectionately named the “Behemoth” has accumulated some mileage on the Datsunworks KN20 cylinder head and the dyno confirmed the same power level.
Khang’s 1973 Datsun 240Z was completed in October and he returned with 1,000 miles on the 3.2L L-Series. We adjusted the valves and double-checked power levels.
Happy to see both builds healthy and confirm power output. Enjoy the music from the both L-Series engines, sporting Jenvey ITB EFI managed by Haltech 750 Elite ECUs backed by the CD009a Six-Speed transmission. LONG LIVE THE Z!
