Shop Talk for
Z-Car enthusiasts!

Click here to go to the Z Car Garage home page...Click here to go to the Z Car Blog home page...
Performance Parts for Nissan, Inifiniti and Datsun Cars
Search:

3.8L Greddy TT 350z Nears Completion

Filed under: Featured Cars and Projects,Performance
by Forbes @ 12:33 pm on January 23, 2009

I know that we have been putting up a ton of GT-R related posts lately so here is one for the 350z owners.

Now… Back to your regularly scheduled Z programming.  The 3.8L GReddy TT engine is back in the chassis and all mechanical connections have been made.  Next on the the agenda is to re-install the inter cooler and all the the intake piping that goes with it.  At the same time the all electrical connections will be made and then gone over again to make sure that we don’t have to go back into the engine bay after we are done.  This car also runs a Haltech engine management system that uses a MAP (Manifold Absolute Pressure) sensor instead of the factory MAF (Mass Air Flow) equipment so the final tune should be fairly straight forward.

Wikipedia will do a better job at explaining the differences:  CLICK HERE FOR MAP vs. MAF Wiki

This car should be close to being buttoned up near the end of the day and running on the dyno early next week.  This car will be tested extensively by us to make sure that the customer is entire satisfied with the end result.  We may even make a trip to Infineon Raceway for their infamous Wednesday Night drag race series.  With drag slicks or wrinkle wall tires the quarter mile time should be able to meet or best our GT-R.  Seriously.  Z Car out!




RB 240z Project Updates

Filed under: Featured Cars and Projects,Performance
by Forbes @ 10:14 pm on November 13, 2008

Z Car Garage is currently building 3 RB powered Datsuns for some very lucky customers, two 240Zs and one RHD Fairlady Z.  Many of you know Rob Fuller’s “Go Green” RB25 240z from being at Z Car Garage, various car shows, and from the cover of Turbo magazine earlier this year; these customer cars are going to be all that and more!!

Here are a few pictures of Rob’s car to refresh your memory.

Parts have been coming in like crazy recently so I figured it was time to share the goodies with all of you.  First off, GReddy has sent us a few new intake manifolds to abuse in these cars (these pictures are of the stock pieces before our modifications.)

We also had CUSTOM intercoolers made just for this application.  Flow and efficiency were our main concerns in the design and they do not disappoint.   These are extremely trick and are made to the same high standards as all of our cars and will be right at home in the RB engine bay.

Tomei will be supplying the camshafts for all the engines, but they will all be a more aggressive grind than the Tomei pieces in Rob’s 240.  The turbo choice is going to be key with these builds and we will be testing a few different variations before we make a final choice.  This will be extremely critical for the car that will be getting the stroked RB28.  This engine is nearly assembled and should be a monster when completed.

The three current cars are in various stages of completion:

Kurtzee:

This beautiful car was just featured in the November issue of Sport Compact Car.  It was torn apart a few weeks ago just as the article was released.  The struts were shortened and modified to accept coilovers and then sent out to be powder coated.  It is also being prepped for the ZCG Big Brake Kit so that it will be able to stop once the car gets going with all that new found horsepower.

This car is the most complete but the engine is still in the early stages so it is expected to be finished around the same time as the black car.

The Behemoth:

This is the car that will be receiving the RB28.  The plan is for the car to be black on black with the engine bay paint matching the quality of the of all of the exterior paint.  This is a show car that will be built to take all the abuse one can throw at it.  There has been a custom roll cage installed to brace the chassis which will be painted to match the exterior.

The car is currently at paint where we are making sure that all of the body lines are perfect before the black is sprayed, it will be as smooth as glass.  The stroked 2.8L RB is assembled and waiting only on the camshafts before it is buttoned up for the final time.  As I stated earlier this engine will be getting a slightly larger turbo to take full advantage of the added displacement.  The ZCG Big Brake Kit is standard issue.

The Silver Fairlady:

This car is also set to be something really special.  It is a true JDM RHD Fairlady Z that is being restored from the ground up to be the highlight of the owners collection.  While the engine will be built to the same specs as the Kurtzee build, the rest of the car is going to be a true labor of love due to the difficulty of sourcing the rare Fairlady parts.

This car will also be receiving the ZCG brake kit as it will see regular track duty when it isn’t winning every show it enters.  The entire suspension of the car has already been modified to accept coilovers and has been powder coated in a metallic silver just like the Skyline GT-Rs of the past, truly a thing of beauty.

All of the cars will be receiving a custom designed stand-alone ECU, the Hydra Nemesis EMS 2.6.  It will be fully integrated into our custom designed harnesses with a factory fit and finish.  This system has already been installed on our green RB 240 with excellent results.

Another addition to the cars is the 3 piece, custom offset, Panasport wheel set.  These wheels are a beautiful addition to an already amazing package.  They were chosen because they have the strength to handle the power and track use that all of these cars will see.

Look for another installment in these builds with in the next week when the suspension and engine developments mature a bit further.  Long Live The RB Z!




« Newer Articles