We met Bruce L at the Rolex Monterey Motorsports Reunion. He has owned these (two) Series 1 240z cars for decades and wanted us to revive them. Bruce has performed all work himself and never let anyone else touch his Z cars so we were honored to oblige. In addition to getting the cars road-worthy each one sports our Z Car Garage Big-Brakes and Z Car Garage CV Axles. Let’s take a look at how Bruce got into S30’s.

Beginnings

Bruce was introduced to Datsuns with his parent’s Bluebird 4-door 1300 (he took his driving license in this in 1969). He even purchased a brand new 1971 Datsun pickup in 1970 for $1800 and got a glimpse of the Z car:

“In the dealership showroom floor while purchasing this Pickup was a brand new early production Dark Green 1969 240Z with a Tan interior. The price tag was 3,400.00 ish. There was no way I could afford that kind of money for another car, let alone a sports car, and I needed a truck to haul my Dirt Bike to and from the Hollister Hills off-road park. Still, I wanted a 240Z instead of any of the muscle cars of the era. They just didn’t speak to me. Too big and bulky and the Cobra had no top to speak of in those days and it didn’t say buy-me.”

  

In 1973 Bruce walked into that same dealership to see and purchase a used ’72 Lime Yellow 240z.  Leap forward to 1982 and he purchased “Christine” from the same Datsun mechanic that used to work on his yellow ’72. Later in 1989 is when he purchased “Valerie” from a lady named Valerie who wanted to sell right after the ’89 Loma Prieta Earthquake.

 

“I love both of my Z’s even if I had to store them both for ten years. Rob brought them both back to life for me and added all of the improvements to make them come alive. And a thrill to drive once again. I still do all the small general maintenance for the most part on both Z’s, but have given the chore of anything else that I don’t wish to tackle at 67 years old to Rob.”

Bruce and his wife are fantastic people that have been active in the Z car community for a long time. After seeing us at the Rolex event, our operations and many happy customers Bruce wanted us to go through all of his personal cars. Both Series 1 S30’s came to Z Car Garage, starting with Valerie and later the Hot Rod, Christine.

 

Valerie

 

Valerie had been sitting for about 10 years and we performed the basics to get it back on the road again. The fuel tank was removed, boiled out and all fuel/vapor-associated lines were replaced:

 

Chassis

 

The chassis was treated to a light refresh with new parts and bushings from Techno Toy Tuning. T3 finishes the suspension in our signature color and we really appreciate Gabriel and his staff.  T3 adjustable front T/C rods and lower rear control arms:

 

Bruce had already done springs and struts on Valerie long ago…but nothing had serious miles on it so we just had to correct a couple of things, trimmed front springs for a nicer stance and trimmed bump stops. We also replaced the rack and moustache bar bushings.

 

The diff was removed and re-sealed:

 

ZCG Big-Brakes and CV Axles

 

Our readers are likely familiar with “Mrs. Butters”, our 1971 Series 1 240z shop demo car with full suspension and our ZCG Big-Brakes. Following a test drive in Butters, clients are sold on our Z Car Garage Big-Brakes and Z Car Garage CV Axles! Read below for a brief description of these parts:

     

As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel and retaining factory emergency brake lever! A few details below:

Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)

Rotors: 280mm x 20.6 with Alum 7075 hats

Pads: Stoptech 309 sport street pads

Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.

A few closer detail shots of the calipers, rotors and hardware:

 

We removed Bruce’s stock brakes and installed our ZCG Big-Brake kit on both Valerie and Christine. Up front:

 

The rear drums were replace with the ZCG setup and factory hand brake functionality remains!

 

The ZCG Big-Brake Kit fits nicely behind 15″ (Valerie) and 16″ (Christine) Panasports and Bruce is really happy with the disc brake upgrades.

 

 

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 100 CV axle kits on customer cars and we are stoked with all of the positive feedback.

  

We installed CV Axle kit #258 on Valerie and #266 on Christine. Stock half shafts (L) and ZCG units:

 

More pictures of the ZCG axles installed, also visible are the T3 control arms:

  

Engine

 

Bruce gives a little background on Valerie’s drivetrain:

“I originally intended to make Valerie a commute car for my wife to travel between Prunedale and Morgan Hill. The job never materialized and I then decided to make Valerie into a show car. Everything about Christine in terms of how she was built is identical with Valerie, except for the engine which she still retains a 2.4 L with E-31 head, Schneider cam and stock twin” SUs.” Valerie has a 5 speed transmission with custom shift lever.”

 

With the engine gone through by Bruce many years ago, we went ahead replaced the oil pan gasket, pulled/sealed transmission, installed a JWT clutch and updated ignition with Pertronix.

   

 

On the dyno we dialed it in for best performance, making 128hp/127tq at the wheels, video below:

 

 

Just You and Me

Bruce and his wife Enjoying Valerie. He recalls an old car show we both attended (but did know each other then):

“I had Valerie stripped down to bare metal also and repainted in 1989 Mercedes Back Pearl. I then had her wet sanded and polished to a near mirror finish. I took her to the Ohlone College Car Show in 2002 where she won 1^st place in the 240Z category out of Fifty Two 240Z’s. Mr. K was present and awarded Valerie “Best of Show”, signing both awards.”

 

Christine

 

As soon as we finished Valerie, Bruce brought us his second 1970 S30 affectionately named “Christine”. This is his Hot Rod Z:

“I replaced the original 2.4 L engine with a rebuilt 2.8 L engine. I then had an E-31 Head Ported and Polished with a Schneider Cam installed. I installed a 280Z 5-speed transmission that required me to make a custom linkage making the gearshift lever appear to be in a stock position on the console. Then around 1985 I had the car stripped of all way down to bare metal, prepped, sanded along with having deletes welded in on the rear bumper to accommodate the Cobra style bumper.”

 

Christine was also sitting for a decade and we performed similar revival tasks as done to Valerie. The fuel tank was pulled, clutch and oil plump replaced and we did all the corrections that were needed, with ZCG touches. An MSD6AL box with Blaster2 coil was installed and triple-Mikuni PHH 40 carbs (now with titanium velocity stacks) were re-jetted. Rob dyno tuned Christine, making 165hp/159tq at the wheels:

 

Bruce was pleased:

“In 2019 I took Christine to Z Car Garage and had Rob Fuller complete a refresh on the engine to include a Dyno Tune on the Carburetors. Rob did a fantastic job of getting Christine back up and running the way she should be as she had been in storage for 10 years. Rob also did a complete tubular control arm upgrade along with installing solid one-piece half shafts and a complete four-wheel disc brake conversion kit to include the emergency brake.”

As Bruce mentioned, Christine also received our Z Car Garage Big-Brakes and Z Car Garage CV Axles!

  

Both of these products are available now from Z Car Garage. Please email/call Rob!

 

The Big-Brakes look great behind a new set of 16×7 Panasport wheels with s007a tires in 225/50/16:

 

Enjoying the Ride

 

With both 1970 Z cars back on the road Bruce was out Enjoying The Ride. Above, Christine enjoys prime parking at the Pacific Grove Car Show during Monterey Car Week in 2019. Below, Bruce attended the ZONC Annual Car Show in Brisbane, CA earning 1st place with Christine:

 

On that car show note, here is a fun fact: Bruce has been the caretaker of “Sunshine”, a special Z32. Sunshine was previously owned by Carolyn Dudley – ZONC President for many years and personal friend of Mr. K.

 

After Carolyn passed away (RIP), her son sold the Z to Bruce. Under his ownership Bruce has given this 300zx a full restoration and keeps it running well at 157k miles.

“Sunshine was given center stage at Blackhawk Car Show in 2004. People were recognizing Sunshine and they approached her and laid their hands on the car and were praying.  That gave me chills. I stopped taking Sunshine to events until I took her 2 years ago to the ZONC picnic in the bay area and still a lot of people recognized her.”

 

Feelin’ Stronger Everyday

 

We understand that it is hard to entrust a shop with your pride and joy. After purchasing Christine in 1982, all of the work performed on her was completed by Bruce and his best friend in a garage.

“I have never left either of my Z’s at any place to be worked on other than the 2 paint shops. (One in 1985 Sean’s Auto Body in Salinas – Black Acrylic Enamel and One in 1991 or 92 at J&J Auto Body in Auburn Calif – 1989 Mercedes Black Pearl). I also wasn’t concerned in 2019 with leaving either of my 240Z’s with Rob Fuller at  ZCG because of his reputation in the Z World that I explored prior to contacting him at the shop. Christine was never purchased as an investment, she was purchased as a car that I cherished and now 38 years later Christine is still not for sale.”

 

We thank Bruce for giving us the opportunity to help get both of his 1970 Z cars back on the road. Enjoy the picture gallery and  LONG LIVE THE Z!

> 
…[read more]

 

The 2020 Rally From Home South was held October 1 and we had a wonderful driving experience. Hosted by Driving While Awesome, the one-day event brought interesting cars and their drivers sharing a common passion for enjoying the best driving roads in Northern California. We participated with the Z Car Garage 1970 Datsun 240z and this is our report from the day filled with open roads, seemingly endless stretches of curvy mountain passes and good company.

The ZCG Datsun 240z

 

Rob handed me the keys to “Mrs. Butters”, our 1971 Series 1 240z that serves as the shop demo car and I happily obliged to drive. While this S30 deserves its own feature, here are a few details on the build:

Engine: 3.2L L-series with triple Mikuni 44 carbs and ZCG Heat Sheild
Suspension: Full KW coil-over suspension (ZCG-spec)
Brakes: Z Car Garage Big-Brakes
Drivetrain: Nissan CD009a 6-speed, Z Car Garage CV Axles, OS Giken 4.11 LSD
Wheels: 16×7 Panasport with 225/50/16 Toyo Proxes RA1
Interior: Recaro LXF seats

  

The Z performed admirably without a single problem over the 300+ mile event. This is a testament to thorough rally-prep (thanks ZCG crew) and the wonderfully upgraded suspension/chassis. These modifications offered a great balance of ride compliance and stiffness for the canyons with a seamless transition between rough to smooth surfaces. The ZCG Big-brakes also delivered great feel and zero fade…truly confidence-inspiring. Icing on the cake was the Nissan CD009a 6-speed transmission :

 

This gearbox completely transforms the driving experience in Butters. Gone are the long throws of the close-ratio ZX 5-speed and any feelings of fragility with high-speed shifting. The 6-speed simply clicks-off shifts with minimal effort and the gear spacing is truly a match made in heaven for the L-Series. More details with full testing (weights/dyno etc.) coming soon. Enjoy this video of Ms. Butters and hear that L-series sing!

 

 

Rally Start: San Juan to Coalinga

 

With the recent fires and COVID changing how we live, the typical 3-day format of previous DWA rallies (CRR Rewind 2019) was changed to a one-day event. I really enjoyed it and though a single day sounded appealing I did miss the extra driving and mingling of former events. This year the rally was dubbed Rally From Home South, as the start was very close to the South Bay Area. I joined fellow enthusiast Geoff W in his 1972 BMW 2002 Monday morning to blast down to the starting point in San Juan Bautista, CA.

 

The mini-cars and coffee of rally participants was full of wicked metal, both old and new.  The DWA organizers encouraged us that this isn’t a race, and to enjoy the roads at our own pace. I can’t emphasize enough how great this group of folks is. A good portion are DWA-veteran rally drivers and the positivity was contagious. We were the only Datsun/Nissan represented!

   

Geoff and I grabbed our swag bags and rally maps and hopped into our cars heading South through HWY 25. A few brief stops along the way, at Condon Peak (Ron’s S2000) and oil fields in Coalinga:

 

King City to Fort Ord

 

The next stages leaving King City were a mix of long sweepers with a few technical sections.  Despite the smoky sky and blistering heat we made it to the Green Bridge. Here, Geoff and I took a nice break under some trees. Soon we were joined by Naveed, Brendan, Marcelo and a few others!

 

Carmel Valley Road to Laguna Seca

 

This was my favorite stretch of road on the rally. We enjoyed it so much that we turned around and drove it again, while capturing some video of the cars in action. While Geoff and I were putting in work wrestling our vintage cars, Naveed was comfortably living the dream in the Porsche GT3RS from Abrahim of StealthLabs:

 

It is difficult to describe the driving experience through photos, so please enjoy this video I made!

 

Geoff and I switched cars for a bit. I was really impressed with the 2002’s handling, it’s a gem. The rare Camapagnolo wheels also look incredible with the sticky CR65 tires. We arrived at the entrance to Laguna Seca and it was another car show representing a great feature of DWA rallies: diversity. So many cool cars from all era’s and marques! This was a fun time chatting with fellow rally’ers

   

Our final stop was a relaxed gathering at Fort Ord under a filtered sunset.  A great way to end a day of driving. More picture in the gallery!

 

Thank you DWA!

 

Rally From Home South was a surreal experience. I am still day dreaming about the incredible stretches of roads that we travelled all in one day. For what seems like a brief moment in time we were transported to another world with changing landscapes, smells, sights and sounds.  Big thanks to the crew at Driving While Awesome and old/new friends met during the rally. We are definitely signing up for the next event! Enjoy the picture gallery below and LONG LIVE THE Z!

…[read more]

Working with owners that have a long history with their Z gets us excited. This early Series 1 240z (vin# 2144, March 1970) was Bill R’s very first sports car, owned since 1976. The car had been sitting in storage for over 20 years and Bill contacted us for mechanical sorting.

Beginning in 2019 we had the pleasure of working with Bill to help get his Z back on the road. Our Z Car Garage CV Axles along with refurbished brakes, suspension, interior and engine tuning all transform this Z back into the sports car Bill remembered enjoying. Before we dive in to the restoration let’s take a look at his Z car story.

Love at First Sight

“On December 30th 1976 I purchased my Datsun 204z from Niello Volkswagen in Sacramento, I happened to drive by this dealership and noticed a small two door blue sports car. After driving into the lot to check it out I kinda fell in love with it. The asking price was $3,676 and it had 072260 miles on it. At this time I was only 21 years old and wanted a 2-door sports car…

…The next day I returned to the dealership to put a downpayment on this car. I signed the purchase agreement and I was on my way home. Finally my first sports car! From this date in 1976 I always took great pride and joy in this car. Always kept in a garage. At one time I had purchased another 1971 Z for my wife and we had matching 240z’s”

Over the past 44 years of owning his 240z, Bill began to drive it less as his family grew and mechanical issues arose. After being in and out of different repair shops he was not satisfied with the work completed to get the Z running properly. It sat for many years. After finding ZCG, Bill decided to drive from Elk Grove to San Jose to check out the shop and meet Rob.

Bill towed his “AWWSUM Z” to our shop in January 2019 and we performed a full inspection. The plan to get Bill’s Z back on the road included a full suspension/brake refresh, engine tuning, interior refurbishment with weatherstripping and restoration of those groovy True Spoke wire wheels.

Chassis

 

With the Z happily in our shop the chassis was treated to a full suspension rebuild. We installed all new ball joints, bushings, tie rods, wheel bearings and had all parts powder coated. Before removal:

 

Below: New KYB front/rear struts with Eibach springs and ST f/r sway bars. We also installed new adjustable T/C rods and lower control arms (see below) from Techno Toy Tuning. T3 finishes the suspension in our signature color and we really appreciate Gabriel and his staff. They make some of the best suspension parts out there for Z cars.

  

New suspension parts installed up front:

 

Rear suspension, before and after:

 

The underside was steam-cleaned and undercoated:

Brakes

We restored the OEM brakes with all new lines, new brake master cylinder and remanufactured calipers with Stoptech slotted rotors and 309 pads:

       At the rear, brand new factory rear wheel cylinders, rear shoes and turned aluminum drums:

    

 

Z Car Garage CV Axles

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 100 CV axle kits on customer cars and we are stoked with all of the positive feedback.

 

Bill has CV Axle set #281. Stock half shafts (L) and ZCG units:

 

More pictures of the ZCG axles installed, also visible are the T3 control arms:

        

The differential was resealed with new front/side seals:

 

We gave Bill regular updates on his Z:

“Throughout the 2019 year I was in contact with Rob,  he sent me pictures of the work in progress  performed on my 240z.  In October of 2019 I took a drive to the shop to take a look at what was completed. I was able to take my 240z out for a drive around the neighborhood, I was surprised and shocked to drive my z for the first time in years, just the look at all of the work performed on my Z was unbelievable!

 

Engine

 

The engine bay was next. We steam cleaned the entire underside of the car to reveal any drivetrain leaks. The radiator was removed and boiled out. All cooling system hoses were replaced.  A new 280zx starter, new fan clutch, upgraded alternator and new battery with cables were installed:

 

With 148,876 miles on the odometer we performed a compression/leakdown test and the stock L24 passed. A full service tune was performed including new plugs, plug wire set, cap/rotor, fuel filter, valve cover gasket, MSD Blaster2 (black) coil, new drive belts, water pump, oil change and a valve adjustment. Before/after:

 

New Z-therapy carbs and cleanup of the intake manifold/air injection. The valve cover was also powder coated. More pictures in the gallery below:

 

We replaced intake and exhaust manifold gaskets with factory Nissan parts and the exhaust manifold was replaced with an MSA 6-1 coated header:

 

The old twice-pipe exhaust was replaced with our full ZCG exhaust system with a stainless Magnaflow resonator and slash-cut tip:

 

With the new SU carbs, exhaust/header and engine service Rob dyno tuned the Z making 133hp/133tq at the wheels:

 

Enjoy the L24 music in this dyno video:

 

The seats were re-done in blue vinyl:

 

We removed the steering wheel cover revealing a nicely patina’d Series 1 unit in need of light restoration:

 

What a difference!

 

A new shift knob complements the refreshed steering wheel:

 

New pedal covers, many more pictures of the interior refresh in the gallery below:

 

Extensive weatherstripping replacement was performed. Our ZCG door seals to eliminate the “tinniness” when you shut the door. We removed the door panels to restore inner parts, made sure that windows roll up/down smoothly and installed new window felt and runners for the channels:

 

New weatherstripping including hatch seals, doors and window frames:

 

No more leaks or fumes!

 

The vintage True Spoke wheels were re-finished and new 185/70/14 tires with tubes sourced. These wheels were added by Bill in the 70’s and he loves them!

 

The Z was fully detailed inside and out:

Driving is Believing

“On May 15th 2020 I returned to the Z Car Garage to bring my 240z home! Before we put my Z on the trailer Rob took me for a test ride in my Z around the neighborhood and on the freeway to check out the performance and the handling of my newly restored 240z. I didn’t know my car had that much power and cornering capability with stopping power! I thought I was on a race track riding with Rob. After we returned to the shop Rob asked me to take my z out for a test drive by myself, man it never felt so good after many years of not being able to drive my Z without any problems.”

  

Bill owned a Barbecue and Deli business several years ago (Reedsribs and More) and still caters. He thought it was a nice way to thank the shop with a BBQ lunch, an amazing gesture we are thankful for.

“I would like to personally thank each employee that worked on the restoration of my 240z. Rob I would like to thank you personally for the professional way you communicated with me every step of the way with the restoration of my 240z. Since my z has been back home home I showed several friends and previous Z owners the work that was performed in your garage. Everyone was speechless!

Thanks for the restoration and putting me back on the road in my AAWSUM Z”

Bill Reed

 

  

We are so fortunate to work with owners that appreciate the Z and believe in our ability to make them better! Bill we thank you for supporting Z Car Gar Garage, and LONG LIVE THE Z!

More pictures in the gallery below:

Randy Jaffe is an avid car guy and Datsun enthusiast. Beyond his fanatic attention to detail and love for Nissan racing he’s excessive–in the best way possible and we love him for it.  Several years ago we teamed up with Randy to turn his BRE Datsun 240z show car into a competitive vintage road-race car.

 

He was impressed with our work on the BRE Z and told us about another Z project that he was working on but stalled out in Atlanta.  We decided it was time to finish this ultimate track/street car with a healthy dose of his personality. The highlight of this Series 1 240z is a full Rocketbunny body kit with plenty of Z Car Garage touches. Let’s take a closer look at the build:

 

Origins

The creation of the Rocketbunny Z changed courses many times as the build evolved, as Randy recalls:

“I wanted to build a series 1 Radical fun Street car with a completely different look. We started off thinking we would do conventional flares and conventional displacement for a 240 Z. Then my painter Bryson was doing the bodywork and had just installed a Rocketbunny kit on a 350Z and asked me to take a look at that particular body kit. I knew of the first one completed by Sung Kang and I think it was the second or third kit to come to the country when we ordered it from Japan directly.”

 

“The paint color which originally was going to be Porsche’s lava orange evolved because of Michael Eberhardt to Porsche‘s late 60s color called Tangerine. Tangerine painted with a white sub-coat pops where Helen Keller could see the color! Since I am color blind, the brighter the color the better I can see it.  Bryson welded an amazing full roll cage as I decided to create the car as a street and track beast.”

The body was amazingly painted and caged by Bryson of Classic Livery of Atlanta. They are known for many high-end commissions including several RWB Porsche’s for Akira Nakai. Randy’s transporter trekked from Atlanta to drop off this gorgeous chassis at ZCG and our work began.

Assembly Required: Race Chassis Prep

 

The chassis was temporarily mounted on rollers while we prepped suspension pieces. Following the “race-car for the street” theme, we re-created the entire front and rear BRE 240z suspension setup. Everything that the #46 race car has is on this street car from DP racing front/rear struts, koni shocks, identical spring rates, sway bar, adjustable end links, plated finish…all of it. More pictures in the gallery below!

Front and rear:

 

Z Car Garage Big-Brakes

There are two versions of our ZCG Big Brakes  and the only three “racing” setups on are on the BRE car, Alex’s Hako and the Rocketbunny Z:

 

Stay tuned for our latest big-brake upgrade from the minds of ZCG and Stoptech!

 

Back to the chassis, the entire hydraulic system was installed starting with freshly plated lines.

 

DP remote reservoir and plated pedal box:

 

Z Car Garage CV Axles

Z Car Garage is proud to offer a CV axle conversion kit for Datsun S30 and 510 cars. We run these on our race cars and the Rocketbunny Z also got a set.

 

Helping put the power down effectively is an OS Giken limited-slip R180 diff properly set up in-house by Joshua Corwin.

 

Wheels Make The Car

 

The biggest hurdle on this car was wheel choice.  Wheels can make or break the car and they had to befit the “KAMIKAZ” nickname.  There was no way we would have a car with massive flares and not use every single square inch of real estate available to fill with wheel and tire.

 

We sourced some Panasport C8 centers and began a custom build with MemoryFab who was instrumental in helping us with fitment/barrel sizing. Up front are 17×10 with a 275/35/17 tire and 17×12 rear with 335/35/17 tire (NT-01R). At the time there were no other RB cars running a 335 in back! .

 

We spent many hours making the kit fit around these wheels/tires so there was no rubbing:

 

Everyone was pleased with wheel choice for KAMIKAZ, especially Randy:

“I had already ordered and received a set of Watanabe wheels from Japan however they would not work with the rocket bunny kit so when I sent the car to Rob Fuller at Z car garage he did his magic and created a set of custom wheels using a set of Panasport racing C8 NOS wheels. 10 inch wheels on the front 12 inch wheels on the back by 17s gives the car and unreal stance.”

 

Race Engine

 

We had Rebello build a nasty 3.2L for the Z running triple-Mikuni’s, 12:5:1 compression (110 leaded fuel) backed by a 280zx 5-speed. Randy gave us a blank canvas to assemble the entire car but ZCG touches really shine in the engine bay.

“I basically wanted my 46Z race car for the street and asked Rob Fuller to further tap into his magic box so we built a 3.2 race motor full race suspension and the whole 9 yards! Rob and his guys built an amazing car using special finishes on some of the metal work under the hood and the car is just insane to drive.”

Here are a few pictures of the assembly with many more in the gallery. Aluminum flywheel with twin-plate setup and comp oil pan just like BRE car:

   

Triple Mikuni induction:

 

Engine going in and detail work beginning. We re-created the cooling system from the BRE car and ran all of the chassis wiring.

 

The catch can, radiator and Datsun roadster overflow are all period parts that BRE used and duplicated for the Rocketbunny:

 

 

Interior

With drivetrain and chassis sorted we moved to the interior. Continuing the race car theme is a stripped (but pretty) body-color interior with that beautiful roll cage from Bryson.

The dash was covered in Alcantara. We installed and wired it up with period gauges. All switch gear similar to the BRE car:

 

A few more detail shots:

 

A Braille battery from our friend Gary Savage sits behind the passenger seat:

 

Sparco Pro 2000 seats:

 

Chassis wiring for Euro-spec lights:

 

ZCG door seal upgrade with sound deadening panels. The Z was nearing completion.

 

Enter the JGRBOMB

 

This was our quickest build to date so we could make a debut at the 2018 Japanese Classic Car Show in Long Beach, CA. The night before our roadtrip down to SoCal we applied a Jagermeister livery to the car. Randy’s inspiration came from his obsession with Porsche, and the Max Moritz Racing Porsche 934:

 

“I love race liveries and told the guys at the car garage I wanted to do the Jagermeister racing package on this car and they were not really hip to it but Bryson and I discussed it several times and we both thought it would take the car to the next level.  However I stuck with my gut and flew out to San Jose with the livery kit a few days before JCCS and after the first hood decal Rob and his guys were scratching their head thinking hmmm – This may not be a bad idea LOL.”

 

Rob and I finished applying the decals late in the night before going to Long Beach and we received a lot of positive feedback at that show and then the car came back to ZCon in Atlanta and won a Gold Cup award. The car was also shown at SEMA in 2018 where again the car received an immense amount of positive feedback.”

Indeed, the livery on the Rocketbunny (KAMIKAZ) Z looked fantastic and Randy eventually affixed the JGRBOMB license plate to match. We are happy to report that while at JCCS  Randy’s Z won 1st place, Best 240z in a class filled with incredible Z cars!

 

It was also well-received at Z Con and the SEMA show (thanks to Gary and Braille!). That’s BRE front-man Peter Brock and the designer of the Rocketbunny body kit, Kei Miura both signing the Z:

 

 

That BRE Exhaust

We wanted to do a BRE exhaust so we used the Fujitsubo headers and a straight twin-exit with megaphones exactly like the BRE original set up, Randy notes the white color:

 

“Of course BRE had theirs painted yellow from day one and still are but I wanted to do the rocket bunny exhaust megaphones in white to play off the livery. Many vintage race cars have white headers and exhaust so it made sense to me. So the audio level is the same as the 46Z and will wake up the dead.”

  

How does it sound? Check out this short video with a dyno run, enjoy!

 

 

Details

It would take multiple blog posts to cover all the special details throughout this build. Some highlights include fully polishing all trim pieces like quarters, drip rails, etc. Re-keying locks. Even the mirror was done to Randy’s liking.

Things like the differential temperature gauge behind the old gas fill door have a purpose and pay homage to the Datsun vintage race cars. Contrastingly, there are small modern updates like vintage H4 headlights retrofitted with HID units.

We asked Randy what’s it like to drive:

“To me there’s no difference in driving this and the 46Z it’s almost the same build except more rubber on this one!”

To us that is a great compliment because we set out to finish Randy’s vision of the ultimate street/track BRE-flavored Z.

“I find myself several nights a week just walking around the car in my shop and admiring the build that Rob, Josh and the crew at Z Car Garage created.”

We thank Randy for letting us be creative on this Z and it’s been rewarding to see his taste reflected in other builds. This was a fun project and we enjoyed every moment of it. Browse the extensive photo gallery and LONG LIVE THE Z!

 

…[read more]

 

At Z Car Garage we love keeping Z’s on the road. From concours-level restorations to light refurbishments, making a customer’s goals reality is our passion. Richard Y’s 1970 Datsun 240z is a great example of an S30 that has been maintained and restored by us for over a decade. We met him years ago when Rob was working at Scott Performance. In 2004, when we bumped into Richard at Tan’s car wash in Santa Clara he didn’t realize that Rob stayed local, opening ZCG. He brought his Z to us thereafter and we maintained it for the last 15 years.

 

In addition to being a great person and a working professional, Richard daily-drives this Series 1 240z. He is also a purist of sorts, not wanting large wheels and tires, a high-power engine or fancy brakes. His desire is to explore, drive, love and touch the Series 1 car as it was back in the day. In 2011 Richard decided it was time to give his Z some love, and the refurbishment was performed with his “vintage” preferences in mind. A few ZCG touches were added along the way.

Interior

 

Part of enjoying the daily-driving experience comes from a functional, pleasant interior. The dash was previously covered with a cap, having multiple issues underneath. We removed the dash and had it re-conditioned by Dash Restoration:

   

While the dash was out we refurbished the entire heater assembly. The heater core was cleaned and pressure tested.

  

All duct-work was resealed to allow full HVAC function including defrost at max settings. A Honda fan upgrade allows faster air flow and all cable/actuator linkages were re-done:

   Heater /motor back in place:

 

We finished restoring the HVAC by getting the vintage A/C unit functioning again. New condenser and lines:

  

Once the new dash returned we started re-assembly. All hardware was replaced and gauges were tested for proper operation:

   

A host of rare, NOS factory parts from Rob’s stash helped complete the dash. Series 1-specific parts like the map light trim and coin-tray were broken:

 

The NOS coin tray and map light trim installed:

  

We updated the sound system with a modern head unit and hatch speakers:

 

One of our favorite upgrades to the interior of an S30 is our ZCG sound deadening package. Usually found in our full-blown ZCG restorations, the result is a less tinny sound and almost Germanic-like “clunk” when you shut the doors.

   

Full weatherstrip replacement on the doors, hatch and windows. We also ensured that windows travel up/down smoothly:

  

The finished interior. Ready for Richard to ready enjoy daily driving:

The Z Must Go On

Our man William did some light paint work on car, as this was a “light” restoration and we didn’t want Richard missing his Z for an extended period.  Unfortunately in 2017 the Z suffered from a front end impact.

The car was hit bad enough that the appraisal house, Richard and all of us thought the car was totaled. Rob luckily had just acquired a Series 1 car as a donor. The front end was grafted on and William fabricated a new radiator support and front fenders to make car whole again.

Engine Bay

 

Fresh from paint and with the engine out we focused on making the bay look sharp. All hydraulic lines were plated with new NOS brake and clutch master cylinders, distribution block and booster:

  

New heater hoses, plated fasteners and new rubber isolators:

  

The radiator was upgraded to a Koyo Race unit:

 

The drivetrain itself received minor refreshing including new drive belts, overhauled and tuned SUs, and a new clutch/flywheel backing the factory 4-speed transmission:

 

A few more details and the engine bay is complete.

 

Chassis/Suspension

Although we looked at every nook and cranny nook on this Z we always kept in mind that Richard did not want everything upgraded. He lives and breathes Vintage Z. The suspension was replaced front and rear with NOS parts like new factory ball joints, steering rack bushings, etc. More pictures in the gallery!

   

Eibach springs with Tokico Illumina struts:

 

The rear diff was cleaned up:

 

The brakes were restored to factory spec with upgraded Stoptech slotted rotors and our favorite 309 pads:

  

The rear drums received new wheel cylinders:

  

Since the harness was damaged in the accident we used one from the Series 1 parts car.  All connections were degreased and cleaned, resistance checked and finally 3M wrapped.

  

The entire fuel system was gone through. Here we drop the fuel tank, boil it out and replace all rubber lines. Also visible is the ZCG exhaust system:

  

Exterior

 

The exterior had to look as good as the engine bay and restored interior. All chrome pieces like front/rear bumpers and door handles for straightened and re-chromed.

   

All of the stainless trim was straightened and polished. Shown are drip rails, all window frames, turn signal frames

  

Window and door hardware plated including latches. Re-chromed handles:

  

Little details like factory Nissan wiper blades and a NOS mirror finish the vintage “look” we all cherish:

   

 

NOS wipers:

  

Tail panel assembly:

  

A variety of NOS parts like Euro front turn signals and a full set of emblems adorn the Z:

  

Series 1 pillar emblem:

  

The final touch: 15″ 5-slot wheels offer more tire choices while resembling the classic 14″ size slots:

 

 

Ready to Enjoy The Ride

 

With a nice interior, paint and chassis work Richard’s Z is ready to be enjoyed on a daily basis. As long as you have the parts and the passion Z Car Garage will do all we can to keep Z cars on the road. Enjoy The Ride, Richard!

 

  

…[read more]