Our Z Car Garage Big Brakes have been winning over Z-car enthusiasts locally and globally. Jay recently purchased a set for his 1972 Datsun 240Z and performed the installation himself at home in South Carolina. Last year Jay also purchased a set of Panasport wheels from ZCG and he’s been enjoying the ride. Before we go into his Big-Brake experience let’s hear his Z-story…

“The car was from California and made its way to Gainesville FL and was put in storage. I had been looking for a good 240 and this one was taken by the owner to a shop owned by a friend of a friend. The guy wanted to get it running and sell it. That triggered a phone call to me while on a anniversary trip with my wife to Italy, we were living in St Augustine Florida at the time. My buddy sent me some pics and a quick video and he grabbed the car for me. It was all there and very little rust. I had not really considered a Blue one, much less one with white interior.”

 

Jay and 3 friends restored the car (minus paint and the head work) in his 2 car garage over 3 years. Jay has met so many people in the Z community and learned much about Z cars:

 

Beautiful engine bay with new engine:

Check out the before/after on the interior…great work Jay and friends!

  

Jay recalls how he found ZCG and eventually purchased a set of Panasports from us:

“I found the Z Car Garage videos on YouTube very early on which led me to your website. I went to Daytona to see Randy Jaffe’s #46 BRE 240z car run and left just before John rolled it. I met Rob at the Amelia Concours earlier this year and bought a set of Panasports from the shop. I also have become friends and an Insurance client of Jim Frederick in Lutz Florida who I believe has the finest collection of low VIN original Z’s in the World!  Jim has also helped me with parts and advice on this build.  I am hoping Larry Chen will make it down to film Jim’s collection.”

 

 

Z Car Garage Big-Brakes

    

As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel and retaining factory emergency brake lever! A few details below:

Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)

Rotors: 280mm x 20.6 with Alum 7075 hats

Pads: Stoptech 309 sport street pads

Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.

A few closer detail shots of the calipers, rotors and hardware:

 

Big-Brake Kits Available For DIY Install!

Z Car Garage is proud to offer our Big-Brake Kit to Z-Car owners that want to perform the installation themselves. We can ship worldwide and each kit contains everything needed with a comprehensive (40-page) installation guide. Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE. Enjoy these pictures of Jay’s beautiful S30 and his ZCG Big-Brake installation:

As mentioned, our ZCG Big-Brake kit ships with everything needed to install and retains the factory parking brake. Jay successfully installed the BBK on his Z along with a full suspension rebuild:

“The kit was packed and labeled extremely well, everything was included except for brake fluid.  The manual Rob sent me was very good. If you are looking for a great bolt on brake solution for your S30 with no need to cut n paste parts to make it all work, look no further than Z Car Garage. Great quality and Great folks to deal with. I had a small hiccup and Rob jumped on the phone and had me fixed up. Very happy with my purchase!”

Jay used OEM bushings and parts for his suspension refresh and full exhaust system from Zstory:

Beyond ease of installation and quality components, our Big-Brakes perform by offering superb pedal feel…everyone that drives our demo Z confirms! This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. Jay was very happy as well with great feedback:

“The performance of the brakes is awesome. My car is essentially a stock L24 but I live in the Blue Ridge Mountains and we have a lot of great driving roads and frankly the stock brakes sort of didn’t inspire confidence. This allows me to drive the car a lot harder with no worries. Super happy with the fit, finish & performance of the brakes. Thanks to you guys for making parts that take these old cars to the next level.”

Enjoying the Ride

Jay has been braking deeper and with more confidence on those Blue Ridge mountain roads, we love that this Z gets driven! Enjoy the short video Jay sent us the Z in action:

 

You can see more pictures in the gallery and thanks for your support Jay! Stay tuned for more customer installations of our ZCG Big-Brakes! Check out our ZCG CV axles HERE. Long Live The Z!

  

 

Panasport wheels for your Z car

    

Treat your Z to a brand new set of Panasport wheels! Z Car Garage is an authorized Panasport dealer and have limited sets available for fitment on your S30 Z car. We special order this offset to enable fitment of a 225/50/16 tire on the 1970 to 1978 S30s.

Contact us: rob@zcargarage.com or call 408-452-0350 Limited availability (pallet pictured)

Wondering how a set of Panasports would look on your Z car? Please enjoy pictures below of ZCG customer cars in jus about every color imaginable with Panasport wheels:

 
 
…[read more]

Z Car Garage is proud to offer 13×7 Panasport racing wheels for your Datsun 510. These are +3 offset and perfect fitment for your B-Sedan/TransAm series Datsun 510 running vintage-class spec 205/60/13 Hoosier R7 (and other) tires. Price is $250 per wheel.

Shown above: Rob Fuller and Masayoshi Kobayashi, President of Panasport/Mag Formula Inc at Laguna Seca with the 13×7 Panasport wheels we run on our Bay Area Datsun Dealers 510. Here are the 13×7 Panasport wheels featured on a few client 510 race cars:

Kelvin’s Ex-Ted Gruner TransAm 510

Gabe’s B-Sedan:

Todd’s Far Performance 510

Ed’s 510

More photos of the wheels can be seen in the gallery below

Contact us: rob@zcargarage.com or call 408-452-0350 to order your set!

Panasport wheels for your Spec Miata!

Yes, when Z Car Gargage is not supporting and racing Z’s or 510s we are avid Spec-Miata fans. ZCG now sells 15×7 +35 offset Panasport racing wheels for your Spec Miata. Price is $250.00 per wheel.

Panasport wheels for your Z car

 

Contact us: rob@zcargarage.com or call 408-452-0350 Limited availability (pallet pictured)

Wondering how a set of Panasports would look on your Z car? Please enjoy pictures below of ZCG customer cars in just about every color imaginable with Panasport Wheels:

     

…[read more]

Richard W brought his 1971 Datsun 240Z from Eureka, Ca to Z Car Garage for a full mechanical restoration back in 2020. Our Z Car Garage Big-Brakes, Z Car Garage CV Axles and Z Car Garage Heat Shield along with a new drivetrain and full suspension transformed this Series 1 S30.

With a few thousand miles on the build Richard visited ZCG earlier this year for routine maintenance. We changed the fluids, resolved a charging issue, checked the driveline and overall health of the Z.

While the Z was with us we performed extensive road testing with acceleration, freeway cruising, dyno runs and more all shown in the video below. Turn those speakers up and enjoy!

I could not resist taking more photos of the engine, interior and chassis on this gorgeous Sunshine Yellow Series 1. Enjoy some photos from his recent visit and of course zcarblog has the full report on our restoration of Richard’s Z.

Drivetrain

We got the original L24 with SUs running after sitting for years, but Richard wanted more power and Rob suggested a Rebello 3.1L engine. Supporting parts included an MSA 6-into-1 header, ZCG exhaust system, internally regulated 280ZX alternator, 280ZX gear reduction starter, KOYO race radiator (custom upper hose) and Z Car Garage Heat Shield. Here are a few pictures of the engine build/installation with many more in the gallery:

To handle the power from the 3.1L engine we replaced the stock transmission with a Nissan KA24 (FS5W71C) transmission. This was a common swap (before the CD009a came to market) performed by modifying a 280Z L-series bell housing. When we upgraded the transmission we also installed a JWT HD clutch with aluminum flywheel. Helping put the power down efficiently is an OS Giken LSD. The R180 houses a 4.11 R&P and the assembly is setup in-house (by Joshua Corwin).

Engine Bay Services

Richard’s Z received a total engine bay restoration. Please visit the gallery below for more pictures documenting the engine bay restoration work, it’s where our efforts shine! Final Before/After in the engine bay:

 

Suspension

Richard’s chassis was treated to a full suspension rebuild with new parts, bushings and a full coil-over (Koni struts with our spring rates) suspension from Techno Toy Tuning. T3 finishes the suspension in our signature color and we really appreciate Gabriel and his staff. They make some of the best suspension parts out there for Z cars.

Front Suspension refresh with T/C rod, crossmember and steering rack detail: Rear end with T3 lower control arms and ST Sway bar:

  

     

 

ZCG Big-Brakes and CV Axles

We are proud to have several of our ZCG products on Richard’s 240z. We installed our Z Car Garage Big-Brakes (for small wheels) and also upgraded to Z Car Garage CV Axles! These products have been standard on numerous ZCG builds.

     

We went ahead and got Richard dialed in with the ZCG big-brake kit for small wheels with parking brake and a new OEM Nissan master cylinder. More pics in the gallery!

   

Front brake installation:

  At the rear, the OEM drums brakes were replaced with our ZCG Big-Brakes. Factory handbrake functionality IS retained!

 

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 200+ CV axle kits on customer cars and we are stoked with all of the positive feedback.

 

Richard’s standard half-shafts shown on left:

 

Interior

One of our favorite upgrades to the interior of an S30 is our ZCG sound deadening package. Usually found in our full-blown ZCG restorations, the result is a less tinny sound and almost Germanic-like “clunk” when you shut the doors.

 

The stock seats were replaced with Recaro Specialist in black leather, we love these seats for the S30:

Please check the gallery below for more detail shots, there are too many to list in this blog post!

Enjoying The Ride

It was great to see Richard again and meet his wife this time, recalling how he purchased the Z new in December of 1970! We love that this restoration is out on the road and being enjoyed. It’s also a great example of how no matter how far away you live from Z Car Garage we will help our clients any way we can. Long Live The Z!

“Richard got out of the Z and told me he had bought this Z 50 years ago that week, it’s been with him through alot of stuff and now his kids and grandkids will get to enjoy it. I looked him in the eye and said I’ll be here for their chapters, any time they need me. I’m attached to this Z now too.”

 

…[read more]

Z cars may remain with their loving owners for years, change ownership or even get spotlighted in the media at some point. Our “where are they now” series features past Z Car Garage vehicles with updates on their status. In this second installment we catch up with Greg’s 1977 Datsun 280Z, now residing in Seattle, WA.

Z Car Garage Restoration

We met the previous owner, Greg H a few years ago at a Blackhawk Museum gathering where famed Peter Brock (BRE) was speaking. Greg told us that he found a clean, low-mileage 280z and he was really interested in ZCG going through it. After he visited the shop we discussed our previous 280z builds (Cece, Gary and the Roth’s) and got to work building a Z for Greg that would reflect his tastes while keeping the vintage vibe. This 1977 280z was treated to a ZCG-style mechanical restoration including a new drivetrain, engine bay restoration, total suspension rebuild and more.

You can read all about our work on this Z here HERE. A few highlights include our Z Car Garage Big-Brakes developed with Stoptech:

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 200 CV axle kits on customer cars and we are stoked with all of the positive feedback.

Greg received ZCG CV Axle set #264, standard half-shafts shown on left:

 

 

The Z received a new L31 engine with fresh 280Z 5-speed transmission. The entire engine bay was detailed with new hoses/clamps, plating and wiring:

Full front and rear suspension rebuild:

Panasport wheels:

 

The interior received a full ZCG-style treatment with our custom high-end sound deadening and carpet. ZCG door seals and sound deadening were applied as well new hatch seals. We modified the floor to accommodate Recaro LXF Specialist seats (in leather) to suit Greg’s height while maintaining full seat travel/movement:

  

Where is it now?

In August 2020, Greg H listed the Z on Bring a Trailer, you can see the auction HERE. The auction winner and new owner Greg J reached out to us and we’ve been in touch ever since. He even sent us this nice write-up below of his journey picking up the Z in Fresno, CA and driving back up to his home in Seattle, WA. Enjoy!

You can’t go back, or can you?

By Greg James

There’s an old saying about never being able to go back. In a sense, it’s true. Anyone approaching-or at- senior citizen status knows what I mean. However, with our cars, we can re-live some of our youth even If it means doing so with a bit more weight, less hair, and a more measured approach to what and how we drive. In other words a car can be a great way to go back in time. In the early 1980’s, while in college, I earned my degree from the school of auto hard knocks before getting things more or less sorted out. Impulsive car buying decisions  and – admittedly – my poor maintenance of those same cars resulted in a series of duds that ended up junked or unloaded quickly. That list included a Datsun 610, Sunbeam Alpine, Saab 99, and a Datsun 1600 Roadster. Eventually after trial and error and a couple of seized motors, I found my “road mate”: A lightly used Orange/Black 1973 Datsun 240Z. Unlike my previous cars, the Datsun was quick, reliable (By then I’d learned to change the oil), and sleek.  Did I mention reliable? I drove it for over 50K miles, and it never let me down. After 3 years of ownership I sold the 240Z and moved on to a 1976 Porsche 911S. I quickly embraced the Porsche marque and over the next several decades, bought, sold, and “drove the wheels off” a dozen 911 cars starting with the original S and up to my current pair of Neunelfers, a 1996 993 Twin Turbo, and a 1985 3.2 Carrera. During Porsche ownership I rarely looked back at – or thought about – any of my former cars, with one big exception, the Datsun 240Z. When I occasionally saw one on the road, I remembered the ‘73 and the numerous road trips I took with my girlfriend to places like Sun Valley Idaho or San Francisco. By today’s standards, the originals Z’s are primitive and underpowered. 40 years ago they were a sexy Japanese import with curb appeal, and performance to match.

At the height of the 2020 summer Covid shutdown, my attention turned to the Internet and many of the popular on-line auctions sites. Datsun 240Z’s had become a staple on Bring A Trailer, and auctions often featured nut and bolt restorations or original low mile “time capsules”. Six figure sales of a Japanese car that originally sold for around $3500 occurred weekly. Eventually boredom, fond memories, and my own curiosity got the better of me and I decided to add a “Z” to my small car collection. That decision then prompted me to soul search as I contemplated buying a 1970’s era Datsun: Would it be a rotisserie restored early series low mile 240Z that could $100k or more? Perhaps a DIY restored high quality “driver” for $30-50k? Or a 280Z with fuel injection, a more robust build and the optional 5-speed transmission?

In the end, after a fair amount of research, chats with local Z owners, and several test drives I settled on the 280Z. I concluded I wanted a car I’d drive, and fuel injection made sense because of lower maintenance costs, and less finicky old school technology. Eventually the ideal candidate came up on BaT. Located in Fresno California, It was a professionally restored 1977 280Z in light metallic blue, with a 5-speed, fuel injection, upgraded suspension brakes and wheels, a new interior, and an impressive stack of receipts from Z Car Garage of San Jose CA. As a bonus, the car had a stroked 3.1 motor built by Hasselgren Engineering of Berkley CA. Dyno’d at 170 RWHP, the straight 6 was producing close to 50 horsepower more than stock and promised performance that would enable it to at least keep up with a modern SUV. I bought the car.

Originally intending to have the car shipped 1000 miles from Fresno to Seattle, I thought back to some of the early road trips I made in my 20’s and convinced my 12 yr. old son Andrew that in the middle of the Covid “summer of boredom” we’d have a great time touring Northern California, and the coasts of Oregon and Washington in the new acquisition. The route we decided on would be nearly 1200 miles, and after explaining what a “Datsun” was to Andrew, and some negotiation, we agreed on two things: We’d drive scenic coastal Hwy 101 from Eureka north, and lunches would be at In-N-Out Burger.

We flew to Fresno on a Saturday and met the owner at the airport. After a short test drive in which the Datsun performed well, and some chit chat about cars, the weather, traffic, money, and why a beat up Porsche 914 is cooler than a modern Mazda Miata, we were off. We left at 3 in the afternoon on a typical 105 degree Fresno summer day. The owner promised everything in the car worked, and true to his word, the A/C blew cold, which was a big relief. On the freeway, the 3.1 straight six performed well. With noticeably more grunt than a stock 2.8 the car accelerated in a predictable linear manner. No hesitation, no carb flat spot, just smooth running. In fact, I judged its acceleration to be similar to my 207 HP US spec 1985 3.2 Carrera. The 5 speed was tight, the steering crisp, and the overall feel told me we’d have some spirited driving ahead of us.

Day 1 took us from Fresno, 300 miles north to Redding CA on I-5, which was uneventful freeway driving. Day 2 was more exciting as we departed Redding early and made our way to CA Hwy 299, a well maintained mostly 2 lane mountain road that snakes 150 miles west through the Coastal range while following the Trinity River to the Pacific Ocean. I’m lucky enough to have driven some spectacular western US “driver” roads in my 60 years, and 299 would rank near the very top for curves, hairpins, fast straights, scenery, and a respectable number of passing lanes. We made it to Eureka and the coast in under 3 hours, and just in time for lunch at In-N-Out Burger, California’s famously good fast food chain. From there we drove north on 101 with a stop at Redwoods National Park and a stroll through The Lady Bird Johnson Grove of Giants. While I’ve always appreciated the amazing machines we humans have managed to build with our big brains and ingenuity, nothing human-made can match the awe you feel standing next to a 2000 year old, 300 foot tall truly enormous tree. From the Redwoods, we proceeded north on 101 along the Southern Oregon coast. Traffic was light, and Oregon State Troopers were few and far between. Andrew and I reveled in the scenery: rugged beaches, breaking waves, jagged near-shore islands, steep cliffs. 101 is a drivers dream! We stopped for the night in the beach town of Florence Oregon, famous for its miles of sand dunes and Honeyman State Park. The next day, after a fisherman’s breakfast and some strong coffee, the plan was to continue north on 101. However, fires closed the road ten miles north of Florence and we were forced to sidetrack east to Eugene Oregon and I-5 for the rest of the trip to Seattle. The last days 300 miles went smoothly, and the Datsun 280Z handled high freeway speeds with minimal effort. At 3000 RPM in 5th, the big 3.1 had us cruising along effortlessly at 80MPH. All in all, a great trip with a great kid in a wonderful car.  Ah, the memories…

Enjoying The Ride

In March of 2021, Greg contacted us with a nice update on the Z…he had early bumpers installed and it looks great:

Thanks for sharing your story and passion with us Greg. We are stoked that you got to Enjoy The Ride in the Z with family on an epic roadtrip. Here’s to many more memorieZ.  Stay tuned for our next “Where are they now” feature, and if you missed our first installment find it HERE. Long Live The Z!