This is Ed B’s 1971 Datsun 240Z in Sunshine Yellow. No, it does not have many performance parts such as our Z Car Garage Big-Brakes, Z Car Garage CV Axles or a triple-carb’d high-power engine. In fact, this Z is mostly original, just the way Ed has kept it since ordering it new 51 years ago!

 

We have known Ed for a long time, actually preceding the opening of Z Car Garage. A young 26 year-old Rob Fuller was helping maintain this “no frills” Z and that continued to present day. Simply put, Ed is a passionate owner who takes care of his Z so he can drive it regularly. When it was time, we handled his SU carbs. If a fuel pump failed we replaced it. Suspension issue? We took care of it to ensure he was always Enjoying The Ride. Let’s take a look at how Ed became a Z car enthusiast.

Time Machine

 

In 1970 just one year out of College, Ed was looking for new car. As a designer, a photographer and a race car fan he wanted a 2-seat sports car. There wasn’t much to choose from. The Triumph and the MG were too cramped. The Porsche and the Jaguar were too expensive. Then Road and Track ran a cover story on the New Datsun 240Z. It had everything, style, performance and it was affordable:

“I ordered one in late 1970 from Camino Datsun in Sunnyvale for $3500. There was a waiting list due to a dock strike in San Francisco and most of the cars were going to LA. When a truckload arrived, you could choose from 4 or 5 available. The only options were the color and I passed on several until I saw the Sunshine Yellow… the first one in San Jose. It was a one-year color and matched the cover photo on Road and Track. I took delivery in June of ’71 after just loosing my job at Ampex in the ’71 tech recession. I had little money but plenty of time to enjoy my summer in a new Z.”

 

Since purchasing new in 1970, Ed got to know his S30 and take it on many adventures.

“Learning to drive the Z in ‘71 and I found out I’m more of a cruiser than a racer. Early on I couldn’t afford expensive modifications. I added cast aluminum wheels, lowered the car with shorter springs, much stiffer anti sway bars rather than air dams, Talbot racing mirrors and custom exhaust headers. I stopped there and kept the original body profile unchanged thereafter. I kept it close to original for 50 years”

Below (L) Three  Z’s in his family at one time and (R) SAE car show at the University of Santa Clara:

 

The Z has been in several car shows over the years and was even photographed by the famed Ron Kimball for Car Calendars and print material. The Ron Kimball Studio photo shoot was on the 17-mile drive in Carmel and one of these images appeared in the Newsweek article on the introduction of the new Nissan 350Z.

 

Keeping Ed On The Road

 

“In 50 years nearly everything has had maintenance issues from interior seat covers and carpet kits to a replaced cracked dash. Rob Fuller has been my go-to Z car expert since even before he opened the Z Car Garage.”

We happily obliged to maintain the Z with Ed’s blessing. Here are a few things we’ve done over the years:

2009- replaced leaking hoses in engine bay, new battery, clutch hydraulics repaired, replaced broken broken bolts in lower timing cover, maintenance work

2012- standard ignition failed and replaced with Pertronix, upgraded coil, new T/C rod bushings, front control arm bushings, rack bushings, new tie-rods, ball joints, rebuilt suspension, major service tune, adjusted his carbs and valves for best performance and lubed his choke cables

2014- differential rebuilt, gas tank re-lined/sealed and all recovery lines replaced, new Tokico shocks

  

The engine was rebuilt at 130K miles (Techcraft) including 5 angle cut on hardened valves and 280z piston rods. It now has 250K miles. The SU carbs were recently rebuilt. On the dyno the L24 made 137hp/142tq to the wheels:

  

Enjoy the dyno video!

 

Ed’s 240Z has been hit three times in the rear end at stop lights with only minor body damage that never took out the tail lights but resulted in three full body paint jobs. For the latest incident we had our man  William re-paint the car in #919 Sunshine Yellow. He also repaired the right front fender and blended existing paint work and it turned out great.

 

On his most recent visit we repaired the transmission shift boot and performed a tune-up… and he’s off.

   

Now the car looks as good as it runs and Ed just drives while staying on top of maintenance.

 

Enjoying The Ride

 

We love when Ed sends us pictures of his drives in the Z:

“Still looks and drives good after 50 years. As Rob would say “Long live the Z”. Rob even introduced me to Peter Bock and John Morton and I now feel like I’m even more a part of the Z car family.”

 

Thanks to Ed for trusting us with your Z. We look forward to many more years of smiles behind the wheel! Your Z is a great example of how to Enjoy The Ride without all of the hot rod parts and we admire your efforts to keep it close to stock!

…[read more]

 

Z Car Garage is expanding to support our vintage, late model and motorsport work. We are seeking an experienced and skilled automotive technician to join our team with two open positions available. This is not an average automotive job. We work 4-10hr days and offer competitive pay/benefits.

Requirements: Automotive experience, your own set of tools, willingness to learn, and be part of a team.

Nissan/Datsun experience is NOT a requirement, you just need to have passion.

Interested or know someone who might be a good fit? Share this, spread the word and please contact rob@zcargarage.com or call us at (408)452-0350.

 

  

 

 

 

Z Car Garage is expanding to support our vintage, late model and motorsport work. We are seeking an experienced and skilled automotive technician to join our team. This is not an average automotive job. We work 4-10hr days and offer competitive pay/benefits.

Requirements: Automotive experience, your own set of tools, willingness to learn, and be part of a team.

Nissan/Datsun experience is NOT a requirement, you just need to have passion.

Interested or know someone who might be a good fit? Share this, spread the word and please contact rob@zcargarage.com or call us at (408)452-0350.

 

  

 

 

Keith Y came to Z Car Garage for dyno tuning on his Datsun 510 “Brock Buster” tribute. This Dime was a complete build performed by our friend, fellow racer and Datsun guru Troy Ermish.

 

Troy’s restoration of this car was fantastic and we love the 13″ Libra-style VTO with white-letters-out tires:

 

Underhood lies a Rebello 1700cc L-series with dual-Mikuni carbs and the chassis treated to a host of Troy’s suspension goodies:

 

When Keith brought the car to us it was not running correctly. Baseline numbers were 94hp/106tq. With Rob’s tuning the L-series now screams past 7ooorpm, making 125hp/114tq to the wheels. Gains of 31hp/8tq!

 

Enjoy the L-series music on the dyno, we included both engine and exhaust points of view:

 

Keith is happy and we are impressed (as always) with another Ermish creation. Coincidentally, the original real-deal Brock Buster 510 is being restored back it former glory as we speak at Troy’s shop! Looking forward to seeing it on the road.

DO IT IN A DATSUN!

At Z Car Garage we love dyno tuning vintage race cars that are being brought back to life in addition to event veterans. Stan T came up from Socal on referral from fellow racer Steve Link to get his Datsun 1200 back on the race track.   

The Datsun 1200

A few words on the 1200 for the uninitiated, as this small but feisty little Datsun surprised many. The car was Nissan chassis code B110, sold in Japan 1970-1972 and in North America in 1971-1973. Known in the states as a “1200” from its 1.2L engine size and referred to as “Datsun Sunny 1200” in Japan, The 1200 had a rich racing history with success both here and abroad with much of it prowess coming from a lightweight chassis and potent A12 powerplant.

Stan bought his Datsun about 10 years ago as a barn find, tired SCCA H Production racecar. The SCCA logbook that came with the car showed only two races ever entered. It was mostly stock, with a bolt-in Autopower roll cage. Stan tells us about his build and desire to build it with period parts wherever possible:

“Back in the day, one could literally build a Datsun 1200 racecar out of the pages of the Datsun Competition parts catalog. Everything from engines to gearboxes to LSD rear ends was available. Factory teams and independents flocked to the Datsun nameplate, using the available go-fast bits and pieces. My thought with this project was to build up a tribute car in the vein of the original SCCA C Sedan class cars from the 70s, using parts from the Datsun Competition catalog as much as possible. No later, larger engine. No bigger rear axle. Everything was to be as close to period as possible, everything was to be restored with an eye towards authenticity and durability. No Tilton or Wilwood braking systems…I re-fabricated the braking system using historical pictures as a reference.”

“I’ve searched for several years gathering bits here and there from around the world. It was a tedious process – racers naturally use up parts, parts which were not plentiful to start with, and the stockpiles of available pieces had grown smaller over the years. The F5C56A close ratio 5-speed transmission came from New Zealand. A quick shifter and some engine parts came from Japan. Reproduction tail lamp housing gaskets came from a fellow 1200 enthusiast in the Pacific Northwest.”

What about that cool two-piece rocker cover?

“The one-off alloy rocker cover was CNC milled by a genius 1200 owner who took pity on my plea for a two piece unit that would make valve clearance adjustments considerably easier in the pits and back at the shop.”

Race prep advice came from retired 1200 racers who provided a treasure trove of knowledge. The engine was built by master machinist John Edwards in Costa Mesa who, when he was an automotive shop teacher, persuaded Nissan to donate dozens of the A12 engines to the school district for training purposes. 

“This engine is an old SCCA warhorse that was run for years in the San Francisco region. The engine features a ported GX head and a slew of NLA Nismo bits along with trick “modern” pieces like ARP head studs & rod bolts and B-Projects rocker arm collars. It is being resurrected for vintage racing, using a bit more moderate state of tune for longevity and reliability. (if 12.8:1 compression can be called “moderate”)”

Below is a video showing Stan’s A12 motor on the R&D SimTester. It has a variable speed electric motor connected to the flywheel end of the crankshaft, spinning the motor. An oil line connected to the inlet side of the oil pump pressure feeds clean oil to the engine. The tester allows a ‘clean room’ run in of the freshly built engine to bed all the assemblies in, check for oil leaks, find weak/stripped bolts, ascertain clearances of rotating bits at various speeds etc. without generating heat and racket:

 

Stan adds the final steps of his build before dyno tuning:

“Final assembly and fabrication was done by Vinny Torres at Steve Link Racing in Anaheim. While the parts chase was going on, I stripped the body down to a bare shell and had it soda blasted back to bare metal, then repainted it the way it was when I bought it. During that phase, heavy rust was discovered in the cowl area which demanded attention, and after the heavy undercoating was stripped off, it was found out that the front clip of the car had been replaced at some point in an amateurish fashion, requiring a trip to the body shop alignment table to tug things back into some semblance of square.”

 

Dyno Tuning

With the car on the dyno Rob and Josh went to work checking things over in the engine bay. They set the timing correctly, worked on the A/F ratio and fixed a few items in the engine bay.    

  The car made fantastic power screaming to 8500rpm: 

 It was a win/win and Stan was more than pleased:

 “1^st dyno run (blue) showing how poorly the engine ran when I brought it in, then the last dyno run (red) showing the Helen Keller Miracle Worker version, where at the end of that run we all high-fived each other and shouted “Done!” Watching Rob & Josh work together was like watching a couple of master musicians in a recording studio bouncing musical ideas off of each other, with each building on the other’s talents until all of a sudden everything clicks, and a hit is born. They make it seem almost effortless until one steps back and realizes the personal database of tuning knowledge they have has been amassed through thousands and thousands of dyno runs and hundreds of days at the track all feeding back on each other. All the while I stood there awestruck, just happy not to get in the way and to learn a few things while watching the masters at work.”

 

 

Thank you Stan for bringing your 1200 to ZCG. We look forward to your next race!