The 2020 Rally From Home South was held October 1 and we had a wonderful driving experience. Hosted by Driving While Awesome, the one-day event brought interesting cars and their drivers sharing a common passion for enjoying the best driving roads in Northern California. We participated with the Z Car Garage 1970 Datsun 240z and this is our report from the day filled with open roads, seemingly endless stretches of curvy mountain passes and good company.

The ZCG Datsun 240z

 

Rob handed me the keys to “Mrs. Butters”, our 1971 Series 1 240z that serves as the shop demo car and I happily obliged to drive. While this S30 deserves its own feature, here are a few details on the build:

Engine: 3.2L L-series with triple Mikuni 44 carbs and ZCG Heat Sheild
Suspension: Full KW coil-over suspension (ZCG-spec)
Brakes: Z Car Garage Big-Brakes
Drivetrain: Nissan CD009a 6-speed, Z Car Garage CV Axles, OS Giken 4.11 LSD
Wheels: 16×7 Panasport with 225/50/16 Toyo Proxes RA1
Interior: Recaro LXF seats

  

The Z performed admirably without a single problem over the 300+ mile event. This is a testament to thorough rally-prep (thanks ZCG crew) and the wonderfully upgraded suspension/chassis. These modifications offered a great balance of ride compliance and stiffness for the canyons with a seamless transition between rough to smooth surfaces. The ZCG Big-brakes also delivered great feel and zero fade…truly confidence-inspiring. Icing on the cake was the Nissan CD009a 6-speed transmission :

 

This gearbox completely transforms the driving experience in Butters. Gone are the long throws of the close-ratio ZX 5-speed and any feelings of fragility with high-speed shifting. The 6-speed simply clicks-off shifts with minimal effort and the gear spacing is truly a match made in heaven for the L-Series. More details with full testing (weights/dyno etc.) coming soon. Enjoy this video of Ms. Butters and hear that L-series sing!

 

 

Rally Start: San Juan to Coalinga

 

With the recent fires and COVID changing how we live, the typical 3-day format of previous DWA rallies (CRR Rewind 2019) was changed to a one-day event. I really enjoyed it and though a single day sounded appealing I did miss the extra driving and mingling of former events. This year the rally was dubbed Rally From Home South, as the start was very close to the South Bay Area. I joined fellow enthusiast Geoff W in his 1972 BMW 2002 Monday morning to blast down to the starting point in San Juan Bautista, CA.

 

The mini-cars and coffee of rally participants was full of wicked metal, both old and new.  The DWA organizers encouraged us that this isn’t a race, and to enjoy the roads at our own pace. I can’t emphasize enough how great this group of folks is. A good portion are DWA-veteran rally drivers and the positivity was contagious. We were the only Datsun/Nissan represented!

   

Geoff and I grabbed our swag bags and rally maps and hopped into our cars heading South through HWY 25. A few brief stops along the way, at Condon Peak (Ron’s S2000) and oil fields in Coalinga:

 

King City to Fort Ord

 

The next stages leaving King City were a mix of long sweepers with a few technical sections.  Despite the smoky sky and blistering heat we made it to the Green Bridge. Here, Geoff and I took a nice break under some trees. Soon we were joined by Naveed, Brendan, Marcelo and a few others!

 

Carmel Valley Road to Laguna Seca

 

This was my favorite stretch of road on the rally. We enjoyed it so much that we turned around and drove it again, while capturing some video of the cars in action. While Geoff and I were putting in work wrestling our vintage cars, Naveed was comfortably living the dream in the Porsche GT3RS from Abrahim of StealthLabs:

 

It is difficult to describe the driving experience through photos, so please enjoy this video I made!

 

Geoff and I switched cars for a bit. I was really impressed with the 2002’s handling, it’s a gem. The rare Camapagnolo wheels also look incredible with the sticky CR65 tires. We arrived at the entrance to Laguna Seca and it was another car show representing a great feature of DWA rallies: diversity. So many cool cars from all era’s and marques! This was a fun time chatting with fellow rally’ers

   

Our final stop was a relaxed gathering at Fort Ord under a filtered sunset.  A great way to end a day of driving. More picture in the gallery!

 

Thank you DWA!

 

Rally From Home South was a surreal experience. I am still day dreaming about the incredible stretches of roads that we travelled all in one day. For what seems like a brief moment in time we were transported to another world with changing landscapes, smells, sights and sounds.  Big thanks to the crew at Driving While Awesome and old/new friends met during the rally. We are definitely signing up for the next event! Enjoy the picture gallery below and LONG LIVE THE Z!

…[read more]

 

Z Car Garage is expanding to support our vintage, late model and motorsport work. We are seeking an experienced and skilled automotive technician to join our team with two open positions available. This is not an average automotive job. We work 4-10hr days and offer competitive pay/benefits.

Requirements: Automotive experience, your own set of tools, willingness to learn, and be part of a team.

Nissan/Datsun experience is NOT a requirement, you just need to have passion.

Interested or know someone who might be a good fit? Share this, spread the word and please contact rob@zcargarage.com or call us at (408)452-0350.

 

  

 

 

 

***This Z is up for auction on Bring a Trailer right now, link HERE***

 

Our client Brian P’s 1973 Datsun 240z is up for auction on Bring a Trailer. This S30 features our ZCG Big-Brake kit, Z Car Garage CV Axles, dyno tuning and more. Read our full blog report HERE and happy bidding!

 

Ruth and Larry Roth have been part of Z Car Garage since 2008. Over the years we performed a full mechanical, interior and exterior restoration on their 280Z and late last year Ruth reached out to us because it wasn’t running well.  She also shared the unfortunate news of her husband Larry’s sudden passing. For the first time in 50 years she was on her own, with her Z car.

 

Remembering Larry

We are personally invested the cars and people we conduct business with at ZCG. Rob set aside time to make a house call and visit Ruth out in Menlo Park to assess the Z. It sat around for a long time and had signs of headgasket issues. The Roth’s enjoyed the Z for many years adding their own personal touches and with all the ZCG restorative (paint/interior) work, we were at a crossroads with this engine failure.

 

Ruth bought this car brand new and we wanted to not only celebrate Larry but also make the Z drivable again for Ruth to enjoy on her own. The plan was to rebuild her engine (stock style 2.8) and update the chassis with our Z Car Garage Big-Brakes and Z Car Garage CV Axles to make it perfect.  Before we get into the latest work let’s take a look back on the interior/exterior refurbishment.

Interior

 

The dash was removed and sent out for restoration and when it came back we replaced all the gauge lights with updated LEDs. We polished all of the plastic covers, resealed all the heater ducts, and lubed all the heater cables. We also serviced the heater core, replaced all the heater hoses and anything easily accessible while the dash was out.

A set of RECARO LXFs in leather replaced the factory seats:

To complement the seat choice we picked a custom carpet kit and leather for the new door panels and headliner. Another nice touch was the new door panel trim matched the other door panel parts perfectly. More highlights include a new factory center console fitted with an updated HD headunit, MOMO steering wheel, and custom shift boot (Ruth’s choice). Check out detailed pictures of the interior work in this blog post HERE.

 

 

Exterior

 

We met the couple in 2008 when Ruth came in to ZCG for a mechanical refresh.  All hydraulics (brakes/clutch) were restored. The suspension was treated to urethane bushings and Tokico 5-way struts with Eibach springs and a set of beautiful Panasports. Finally, we cut and buffed the paint and Ruth’s Z took on a new look…it was almost like 1978 again! It had been years since we had seen the Roth’s other than routine maintenance. It was time to dive back into the project with a full external restoration.

   

We called upon our man William from William’s Auto Body and both Ruth and Larry had two requests: 1) The Z car must be as awesome inside as outside and 2) we absolutely must keep the pinstriping that had been on the car since new. William was more than up to to the task. This time we went ahead and installed electric power steering for ease/use, our upgraded rearview mirror (as featured on Gary Roser’s car, report later) which includes a backup camera, GPS, temp:

 

Re-chromed bumpers and restored guards:

  

Full glass/chrome trim/weatherstrip R&R. All NOS Nissan!

 

Inner fender liners:

 

NOS emblems replace pitted/fading orignal pieces:

 

Rear tail light panel:

 

William applied the factory paint color and the Z looks fantastic. Finally a set of powder-coated louvers and a full detail really make this 280z standout.
Check out detailed pictures of the exterior work in this blog post HERE.

 

Engine

 

Fast forward to January 2020. We made arrangements to get Ruth’s 280Z back to ZCG for the new engine rebuild and sorting. The tired L28 would be replaced with a rebuilt, “street-style” 2.8:

 

A few engine details like new injectors, oil pan and MSA exhaust header to replace a cracked exhaust manifold:

   

We replaced all hoses in the engine bay and installed a KOYO race radiator. We wanted Ruth to feel comfortable owning this Z by herself. When everything is in working order on a 280z, they can be just as reliable as any late model car.

ZCG Big-Brakes and CV Axles

It had been a long time since we saw Ruth’s S30 so we replaced the old tires with new Bridgestone S007-a (225/50/16) tires followed by a full alignment. We also installed what we like to add to every Z car built here:  our Z Car Garage Big-Brakes for small wheels. This is an all-wheel, 4-piston caliper kit that works beautifully with the balance of the stock M/C and booster. Keeping things operating smoothly are our Z Car Garage CV Axles, read below for a brief description of these parts:

     

As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with engineers at Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel (and some 14″ wheels) and retaining factory emergency brake lever! A few details below: Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized) Rotors: 280mm x 20.6 with Alum 7075 hats Pads: Stoptech 309 sport street pads Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE. A few closer detail shots of the calipers, rotors and hardware:

 

We removed Ruth stock brakes and installed our ZCG Big-Brake kit:

   

As mentioned above, the ZCG Big-Brakes work with the factory M/C and booster. We installed a new M/C for Ruth:

 

At the rear, the factory drum brakes were replaced with our ZCG Big-Brakes. Factory handbrake functionality IS retained! We were happy to hear that Ruth,  being an older woman driving her vintage Z car she bought brand new was totally blown-away how well these brakes work!

 

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 100 CV axle kits on customer cars and we are stoked with all of the positive feedback.

 

Ruth has CV Axle set #332. Stock half shafts (L) and ZCG units:

   

On the road again

 

Icing on the cake after we fixed the Z…following a full detail Rob and Meghan delivered it to Ruth’s home. It was a special moment and Ruth was all smiles.

 

We miss you Larry and this one’s for you…we got Ruth back in her Z car. Know that we will keep this Z on the road while Ruth and ZCG are around! Love cars. Love people. Love life.

 

Enjoy more pictures in the gallery below and LONG LIVE THE Z!

…[read more]

 

Dave L comes from Carmel Valley and he visited Z Car Garage for suspension upgrades on his 1972 Datsun 240z. Prior to meeting us he added many parts to the car himself like a 5-speed transmission but needed our expertise for Z-specific parts. Our Z Car Garage Big-Brakes and Z Car Garage CV Axles along with a dyno-tuned 2.8L L-series really transformed this pretty S30.

  

Suspension

 

The chassis was treated to a full suspension rebuild with new parts and bushings from Techno Toy Tuning. T3 finishes the suspension in our signature color and we really appreciate Gabriel and his staff. They make some of the best suspension parts out there for Z cars.

Stock vs T3 T/C rods up front:

 

Stock rear lower control arms were replaced with T3 adjustable units:

 

Dave provided us with a set of Tokico/springs from back in the day. We installed new tie-rods, Nissan ball joints, rack bushings, bump stops and moustache bar bushings:

   

 

ZCG Big-Brakes and CV Axles

 

Our readers are likely familiar with “Mrs. Butters”, our 1971 Series 1 240z shop demo car with full suspension and our ZCG Big-Brakes. Following a test drive in Butters, clients are sold on our Z Car Garage Big-Brakes and Z Car Garage CV Axles! Read below for a brief description of these parts:

     

As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with engineers at Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel (and some 14″ wheels) and retaining factory emergency brake lever! A few details below:

Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)

Rotors: 280mm x 20.6 with Alum 7075 hats

Pads: Stoptech 309 sport street pads

Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.

A few closer detail shots of the calipers, rotors and hardware:

 

We removed Dave’s stock brakes and installed our ZCG Big-Brake kit. Up front:

    

 

Our Big-Brakes utilize the OEM brake master cylinder and booster along with the factory hydraulic system. A few more shots of the front setup:

 

At the rear, the stock drums were replaced with our ZCG Big-Brakes:

  

Factory handbrake functionality IS retained! A few close-ups of the front and rear setup:

 

Following the suspension and brake installation was a full alignment:

 

The new ZCG Big-Brakes fit nicely behind the 15″ Ansen Sprint wheels:

 

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 100 CV axle kits on customer cars and we are stoked with all of the positive feedback.

 

Dave received axle set #291. Stock half shafts and ZCG units shown below with more pictures in the gallery: