Love for the Z is strong in Northern California

The Z Owners of Northern California (ZONC) is one of the oldest Z car clubs in the nation. In its prime they had over 600 members with close ties to Yutaka Katayama (“Mr. K”) and Nissan USA. We had a wonderful time attending their 50th Birthday Celebration at the Blackhawk Museum in Danville, Ca on June 5, 2022.

 

Despite some morning rain the turnout was impressive for a relaxed gathering. No judged car show or awards, just Z-Car fans catching up with old friends and meeting new enthusiasts. (above) Aerial photos by Bryan Delohery.

Highlights from the show

Still to this day, 240Zs are the most represented model in the club. Expansion over time currently includes all recent Z models and the GT-R, but also reaches back in time to include the Datsun Roadsters and 510s.  For their 50th Birthday Celebration, ZONC assembled a “generations” display in front of the museum with samples of S30, S130, Z31, Z32, Z33 and Z34. Sitting front and center was the 2023 Nissan Z!

 

Racing History

 

A selection of Datsun race cars also joined the “generations” display. Datsun 510 guru and racer Troy Ermish displayed his 1971 B-Sedan 510 “Penny”:

 

Race car driver, restorer and Datsun Historian Glenn Chiou displayed his FAR Performance 240Z. This Z has a very rich racing history, driven in the 70’s by Loren St. Lawrence in VIPS Restaurant livery.

 

Glenn has vintage raced this Z at several high-profile events. He turned a track-mishap into an opportunity to perform a total-restoration (again) and bring this Z back in “Bay Area Datsun Dealers” livery as raced by FAR Performance privateer Walt Maas.

 

Rob Fuller of Z Car Garage displayed his #49 Joel Anderson IMSA GTU Datsun 240Z. An interesting note, both Glenn and Rob’s race cars have ties to ZONC gatherings decades ago.

 

Linda Williams’ 1972 Datsun 240Z OMS Pace Car Duplicate was staged next to the #49 IMSA GTU race car (the original OMS Pace car). Z Car Garage revived this historically-significant Z from its slumber to make it a nice driver for Linda while retaining its survivor status. She loves driving it everywhere.

 

The New Nissan Z!

 

ZONC teamed up with Nissan to display the new 2023 Z as part of the “generations” display in front of the Blackhawk Museum. This is the Performance model sporting a 6-speed manual and Passion Red paint. And Z Car Garage got to drive it back to our shop at the end of the event!

 

Z’s, 510s, Roadsters and More!

 

Here are a few of my favorite S30 Z cars from the gathering, starting with this flared beauty on Watanabe wheels:

 

Flared Series 1 Z with G-nose and Works-style wheels:

 

We were pleasantly surprised to see many Z Car Garage clients so let’s take a look at what they drove. Ed B is the original owner of this 1971 Datsun 240Z ZCG has maintained for almost two decades:

 

Bob Russell is the original owner of this S30 we will have a full report on zcarblog soon!

 

Representing the G35s were our clients Larry and long-time client Jason:

 

Eugene and long-time client Craig showed their 350Zs:

 

 

Richard M’s ZCG-modified 370z was representing Z34s

 

Here is a video from the 50th Birthday Celebration with load-in of the #49 IMSA Datsun 240Z, walk-around of the displays and the new Z leaving, enjoy! More highlights below…

 

260z and 280z

 

S130

Who could forget the S130 280zx! We spotted 4:

 

Z31

Three Z31s, including David’s sweet 25th Anniversary edition. This was his first ZONC event, welcome and thanks for bringing your Z out David!

 

The Works Rally Z

 

In the middle of freshly painted/detailed Datsuns and Nissans was this rather dilapidated S30. Upon closer inspection viewers were treated to the tremendous revival of this real-deal Nissan WORKS rally car. Recently I had just posted a blog report on Randy’s East-African Rally Tribute, so seeing an actual, surviving rally car in person blew me away. We all geeked out pretty hard on the details, and they were impressive:

 

This is chassis #2 of 4 that were built by Nissan for the 1971 Monte Carlo Rally.  It is the project of Tom K and noted Datsun expert Steve Pettersen and their restoration website is a must-visit for history and feature documentation (as shown above). The Z remains largely intact with original parts like the Nissan competition exhaust manifold and roll bar. Period-correct parts like the Ikeda Bussan rally seat and reclining navigator seat were sourced. Check out the heater-port to defrost the headlight covers, Nissan-branded acrylic windows and more:

 

 

Authentic Magnesium rally wheels and Kanto Seiki 8krpm tach! Thanks Tom and Steve for bringing it out to the ZONC event!

 

 

This Z deserves its own spotlight, but enjoy this walk-around video until we can visit Tom and take some proper coverage:

 

Z32

 

Z33 and Z34

Our client Steve’s Nismo Z33 and a brace of 350Zs in the generations display. Good to see a build from way back, Tom’s supercharged 370Z.

 

510s

n

Jay’s 510 features our Z Car Garage CV Axles. We will have a full report soon as he just completed a DWA rallye in the Sierras!

 

Matt’s 510 with turbocharged KA24DE:

 

Andrew’s 4-door Hakosuka Skyline and Josh’s 620 truck

Roadsters

The lone Datsun Roadster was Hotep’s ’69 2000 with L-series drivetrain and factory, OEM hardtop!

  

This rad little B13 Sentra b13 packed a full SR20VET engine from a Nissan X-Trail and 6-speed transmission!

 

 

S12, and S14 Nissans:

 

 

R35 Row

A very large showing of R35 GT-Rs parked together

Plenty of cool, modified cars but this one caught our eye, it is a GT-R “T-Spec”.

 

Only offered in two colors, Millemium Jade and this Midnight Purple finish made iconic by special-edition R34 Skylines. Inside, a Mori green interior and alcantara touches really set it apart from other models. Best part? The owner drives it everywhere despite being an ultra-rare and pricey variant.

   

Driving the New Z to Z Car Garage!

 

I had the opportunity to drive the 2023 Nissan Z from the ZONC show back to our shop in San Jose with a group of die-hard Nissan fans. Huge thanks to Nissan! We had the Z for a few days to enjoy so stay tuned for a full report!

Happy Birthday ZONC!

Spending the day at the ZONC 50th Birthday Celebration reminded us to (in the words of the late Mr.K), ” Love cars. Love people. Love Life.”  This is a club that keep the Z community together year-round and we are excited for their next events. Don’t forget to check out our picture gallery below! Big thanks to the ZONC organizers and Nissan for bringing the new Z out. Stay tuned for a full report our time with the 2023 Z!

…[read more]

 

Z Car Garage is proud to offer 13×7 Panasport racing wheels for your Datsun 510. These are +3 offset and perfect fitment for your B-Sedan/TransAm series Datsun 510 running vintage-class spec 205/60/13 Hoosier R7 (and other) tires. Price is $250 per wheel.

 

Shown above: Rob Fuller and Masayoshi Kobayashi, President of Panasport/Mag Formula Inc at Laguna Seca with the 13×7 Panasport wheels we run on our Bay Area Datsun Dealers 510. Here are the 13×7 Panasport wheels featured on a few client 510 race cars:

Kelvin’s Ex-Ted Gruner TransAm 510

 

Gabe’s B-Sedan:

 

Todd’s Far Performance 510

 

Ed’s 510

 

More photos of the wheels can be seen in the gallery below

 

Contact us: rob@zcargarage.com or call 408-452-0350 to order your set!

 

Panasport wheels for your Spec Miata!

 

Yes, when Z Car Gargage is not supporting and racing Z’s or 510s we are avid Spec-Miata fans. ZCG now sells 15×7 +35 offset Panasport racing wheels for your Spec Miata. Price is $250.00 per wheel.

 

Panasport wheels for your Z car

     Treat your Z to a brand new set of  Panasport Wheels! We special order this offset to enable fitment of a 225/50/16 tire on the 1970 to 1978 S30s. Price is  $325.00 per wheel

Contact us: rob@zcargarage.com or call 408-452-0350 Limited availability (pallet pictured)

Wondering how a set of Panasports would look on your Z car? Please enjoy pictures below of ZCG customer cars in just about every color imaginable with Panasport Wheels:

…[read more]

Z Car Garage wishes you a Happy 5/10 Day! We love driving Datsun 510s on the street and at the race track. Here are a few 510s at the shop today, with more photos in the gallery below. Hope you get to Enjoy the Ride in your Dime today too!

 

Rob’s Bay Area Datsun Dealers 510:

 

Gabe’s B-Sedan:

 

Kelvin’s Ex-Ted Gruner Datsun 510

 

Nick’s Datsun 510 Wagon:

 

 

Rob’s Turbo6 80’s-revival project:

   

Rob Fuller’s 1971 Datsun 510 featured on Hoonigan Autofocus with Larry Chen

  

Enjoy The Boost in this video of the 510s in action. You can also see more on our Instagram story. We hope you can Do It In A Datsun today too!

…[read more]

 

Mark your calendars for June 5th to celebrate Z Owners of Northern California (ZONC) 50th birthday at the Blackhawk Museum in Danville!

 

The Z Owners of Northern California (ZONC) is one of the oldest Z car clubs in the nation. In its prime they had over 600 members with close ties to Yutaka Katayama (“Mr. K”) and Nissan USA. Of the many events and fun runs they host throughout the year, the famous Blackhawk Museum will be the venue for the June 6 birthday party.

 

Local Datsun specialists/racers Troy Ermish and Rob Fuller will be displaying their race cars. Datsun and Nissan cars will be on the plaza and lower lots for everyone to see. Z you there!

 

 

 

 

 

We love to see owners installing our Z Car Garage CV Axles in their vintage Nissans and Datsuns. This 1971 Datsun 510 is owned by Dirk D. and he replaced his failing CV Axle kit with our ZCG CV Axles. You may have seen this Specialty Z-built Dime at events in the SoCal area and we are proud to be part of it!

 

We saw Dirk’s 510 last year at the Japanese Classic Car Show and noticed he was running ZCG CV Axles with an R200 diff and Quaife (ATB) limited slip differential. Great to hear that these parts earn Sebastian’s approval and he installed them with ease at the Specialty-Z facility in Simi Valley, CA. Dirk is stoked:

“After receiving them I was even more impressed. Sebastian said the installation went very smooth. I’ve been running them now for over 2000 miles and haven’t had any issues. Even after putting the wood to it a few times. And the fact that we put 498 horse power to the rear wheels proves to me that they are high quality”

 

Datsun 510 Dreams

 

Dirk has bee working for 10 years perfecting this 510 mechanically and visually. Here is a brief overview…

MOTOR: SR20DET Red top, Mazworx intake, 1320 Injector dynamics, dual scroll exhaust manifold with Garrett 30 GTX twin Scroll, Forged Pistons (CP), Rods (Eagle), ARP Studs, O-Rings, BC Stage 3 Cams (Adjustable cam sprockets), R35 GTR PRP Coil Kit, S15 Oil pick up, High Capacity Oil Pan, Setrab oil cooler, modified Mishmoto radiator, OEM Nissan Fan Clutch, High Capacity Fan, Canton remote oil filter

 

DRIVE TRAIN: 5 speed, RPS Carbon Fiber Clutch, Pressure Plate & Fly Wheel (billet aluminum), Custom Built Drive Shaft 300ZX Yolk & U Joints, ZCG CV Axles and Power steering.

 

Sebastian at Specialty Z dyno-tuned the 510 using a Haltech ECU with maps for E85 and 91 octane fuel. It made 369whp at 16psi and 498whp at 20psi. Enjoy this video of the dyno pass:

 

Interior

 

Inside, a finished custom interior features carbon fiber and alcantara touches:

 

Dirk’s 510 was featured in the February 2019 issue of D Sport Magazine:

 

 

“I wanted a car that wasn’t only for drags or track but could also be driven as a daily driver and still haul ass. With no cooling or tuning issues whatsoever. With major help from Sebastian at Specialty Z and Jamie @ Fab Tech I’ve got everything I asked for and more out of the car couldn’t be happier.”

 

We asked Sebastian what his thoughts were on building Dirk’s 510:

“The thing I enjoyed most about Dirk’s 510 project was that it was something that we normally don’t do as far as the platform goes. So it was new and refreshing. We never worked in depth with the SR20 in the past or the 510 chassis. We stuck to high quality (as we usually do anyway) parts for the build so it was hard to leave others out, overall we were happy with the fit and finish of the Mazworx intake and exhaust manifolds. We used a Garrett GTX 3076 for the turbo and Garrett never disappoints. As far as the drivetrain goes, the ZCG axles were a pleasure to install and the quality was second to none. We had issues with the previous axles and immediately noticed the difference in noise (lack of) and even a nicer feel while driving the car.”

 

We have known Sebastian for many years and Specialty Z is a legendary Z32/late-model Nissan tuning house. Seb is a trusted friend and is always willing to help ZCG. It goes without saying that his shop is top notch with many high-profile projects like tuning pro-racer Chris Forsberg’s TT 370Z. Time flies: (L). Ginash and Eric from JDM Legends at SEMA. (Below) Rob and Seb at Z Car Garage:

 

You won’t see too much from Specialty Z in regards to Datsun related work, but we frequently refer local clients to Seb that have late-model powerplants. Indeed, we sent Bay Area local Jose P to SPZ for tuning on his SR20-powered Datsun 510! We are also super excited to see Seb restoring our Box-flared Datsun 510 that he purchased it from Rob a few years ago:

 

Seb plans to run a Rebello 2.2L with dual-Mikuni induction, here are a few photos from fresh paint and assembly:

 

 

Thank you Dirk and Sebastian for your support! Happy to see you enjoying the Z Car Garage CV Axles in the Dime. Enjoy The Ride!

 

We have many more photos in the gallery and please read below for more information on our ZCG CV Axles:

ZCG CV Axles

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. These are 100% bolt-in replacing your half-shafts and does not use aluminum adapters commonly found in aftermarket units. We have over 200+ CV axle kits on customer cars and we are stoked with all of the positive feedback.

   

For years we have used aftermarket CV axles that utilize an aluminum adapter prone to loosening up over time. Despite efforts to keep things tight (Loctite, hardware changes) we had to keep an eye on them. We developed a better solution that eliminates the need for aluminum adapters and remains 100% bolt-in like a factory half-shaft.

  

Designed and manufactured locally with KAD Models, the ZCG CV axle kit works in both R180 and R200 configurations.

  

These are the beefiest CV axles on the market. They have been tested on the track by our vintage racing customers and also in high hp* street cars (powershifting, clutch dumps, etc.). Each axle has a serial # for peace of mind:

 

The CV axle kit is available now from ZCG for 1595.00 + freight and they come with everything you need to install on your car. Contact us at 408-452-0350 or send Rob an e-mail rob@zcargarage.com to purchase. Installation is just like doing a half-shaft: there is even a marking that shows you where to line up bolts and special hardware:

 

The ZCG CV Axles in action

The video below demonstrates the “looseness” associated with aftermarket CV axles that use adapters compared to the ZCG axles without adapters. Several customer race/street cars running our CV axles are also shown. Enjoy!

 

Enjoy this video made by our client Hazel. She installed our ZCG CV Axles on her Hazel’s 1970 Datsun 240Z

 

Over 150 sets of our ZCG CV Axles are installed in client’s cars all over the world:

Supermachine in Tokyo, Japan is running our Z Car Garage Big-Brakes and Z Car Garage CV Axles in their Series Datsun 240Z:

  

Race car driver, restorer and Datsun Historian Glenn Chiou is running our ZCG CV Axles in this IMSA GTU 260z race car!

  

Racer Brad H is running ZCG CV Axles in his IMSA GTU race car:

  

Race car driver and restoration specialist Jim Froula of Racecraft is running ZCG axles in several of his cars:

Set #246 – installed May 2018 on the “Harry Stewart #52” Datsun 510:

  

Set #247 – installed April 2018 on the 260z

  

Set #248 – installed on Adam Carolla’s “Greg Sorrentino #90” Datsun 510.

  …[read more]