Jay H has been our customer since the beginning. He has a Datsun 240z, Mazda (FD) RX-7 and this 1990 Aztec Red 300ZX Twin Turbo that he’s owned for many years.  Living in a rural, wooded area the Z’s wiring got chewed on by rodents. We fixed the wiring and got the car running again but more issues surfaced. Jay loves this Z so much and it had 122k miles so he decided it was time give it some serious attention.

 

Z Car Garage was happy to oblige as we think the Z32 is one of the best Japanese sports car of the 90’s.

Engine Bay and Drivetrain

 

The engine bay was in need of major cleaning and restoration. First, we performed a compression/leakdown test and the Z passed. With the engine out now we could focus on cleanup:

 

We installed a new engine room wiring harness. Every coolant hose, bypass hose, vacuum hose was replaced. A new underhood insulator with clips replaced the torn oem piece.

 

All p/s hoses were replaced and we modified the p/s steering pump to reduce clutter and eliminate the HICAS completely:

 

The engine was treated to full reseal and timing belt services, more pictures of the engine build in the gallery!

 

With a clean bill of health we installed several performance upgrades including JWT sport 500 turbos, BDE billet half moons/motor mounts, Ashpsec inlet piping, Selin dual-MAF with HR  low-profiles filters/two Z32 MAFs and Nismo 740cc injectors:

 

No turbo upgrade is complete without the Mike Smith turbo manifolds with EGR ( to pass emissions). Unfortunately we will install the last set of these on Felix C’s 300, and that’s it!

 

BDE motor mounts:

 

Nismo 740cc injectors:

 

Ashspec inlet piping:

  

Selin dual-MAF with HR low-profile filters:

 

Before the engine went back in we installed a new JWT HD clutch and aluminum flywheel:

 

The drivetrain was re-installed with numerous items like a new fan and engine cover:

  

Exhaust upgrades included a full SpecialtyZ 3″ exhaust with 3″midpipes:

 

Finally, a GReddy Profec boost controller was installed in the super tidy interior:

 

Rob dyno tuned the Z, making 384hp/348tq to the wheels:

 

Exterior

 

With the engine bay and drivetrain sorted we turned to the body and and exterior trim. Jay wanted to do a full repaint on the car so we had it had it towed engine-out to our man William. Some before shots showing the faded paint and cracked/peeling tail light panel:

 

At William’s the body got some choice parts to make it look like 1990 again: Wings West Pre-’94 rear wing, JDM front fascia (with shaved license plate mount) and Jspec tail lights. With the freshly painted Z back at the shop we tackled re-assembly of new cowl panels, mouldings and various trim. All of these parts really make this Z pop:

 

Extensive moulding/trim replacement: T-top trim before/after shown below

 

Door and window trim:

   

Jspec rear and front looking sharp!

 

Icing on the cake are Jay’s super cool set of old WORK Equip 05 wheels.  We re-finished and polished/painted them running Bridgestone S-04 tires.

 

Wheels make the car and this Z looks incredible standing still and on the road:

Suspension

The chassis received a few upgrades including Stillen sways and SPL titanium HICAS delete We also replaced ABS module the clutch and brake master cylinders

 

One Z Car…Coming Up!

 

Jay didn’t have a car for the duration of the revival and he was on foot running errands near his home.  We handled all of the DMV fees foe him and Rob and Alvin delivered the Z to Jay at his residence.

 

It was a great experience to pull up in the 510 and Z to present it to Jay, he was all smiles:

  

Thank you Jay for bringing your 300zx to Z Car Garage. We admire your love for the Z and passion to keep it on the road in top form! Z32s ROCK! Enjoy the extensive photo gallery below:

LONG LIVE THE Z!

…[read more]

 
Glenn Chiou is an avid Datsun enthusiast having owned and raced several cars. You might remember his VIPS 240z vintage race car from the The Mitty and Rolex Monterey Motorsports Reunion events. He also races a Datsun 510 B-sedan and owns a Nissan R32 Skyline GT-R:

  

This 1972 Nissan 240Z-L however is “the list” car for Glenn that started his Datsun passion. Glenn has owned it for several years, enjoying it as a back-road burner on the street and rallye events.

 

Find out more about the story behind this right-hand-drive survivor over on Petrolicious and also watch this great video:

 

We’ve known Glenn for many years and we actually tuned his Fairlady back in 2012. The 3L stroker produced one of the highest dyno numbers we had seen!

 

Big Brakes for Glenn’s S30

The Z clearly had more than enough power, but braking was always something Glenn wanted to improve and once he heard about our latest Big-Brake Kit for small wheels he became a believer after test driving them. Rather than tell you how we feel about this product, let’s hear Glenn’s experience.

Throughout my years of Z car ownership, I have run a variety of brake setups. My Z cars have seen everything from restored OEM Sumitomos, Toyota 4×4’s, trick Wilwood setups, even frankenstein’d Baer calipers. There is no doubt that it has been one area that I have never been completely satisfied with. Over time, after many years and attempts to find the ‘perfect’ setup, I had given up and just settled for what I had.

The most important aspect to me when it comes to braking on a street driven car is feel. Yes, stopping power is extremely important, but also is not that difficult to achieve on an early Z car that is naturally light to begin with. Feel, however, is something that has always managed to escape me. On my vintage 240z race car, we use multiple master cylinders, swap them in and out, fiddle with our brake proportioning valves, fine tuning them to fit our driving style and preference. We are trying to find that “racer’s edge.” In all honesty, when it comes to a street car, I want nothing to do with all that.

 

Wheel sizing and style was also extremely important to me. I love old school wheels and the sizes they came in. I needed a brake caliper that would fit under my 15” Watanabe RS wheels without having to shave or drastically modify my setup. If it was not for being in love with these wheels, I would have opted for Z Car Garage’s larger big brake kit.

A few words about our latest big-brake kit solution. Our successful, larger ZCG BBK utilizes 328mm rotors and 4-piston calipers requiring a 16″ or 17″ wheel. This kit was made with our friends Tyler and Eric from Stoptech over ten years ago. Recently our customers asked us to make a BBK for smaller wheels so even a guy running 14″ vintage 5-slots slots could brake like a modern sports car. Typical big-brake kits use a 4-piston setup up front and a ZX in back; Proportioning is hard to get right, varying from car to car. We wanted a brake system that suited the car and totally bolted in, no M/C change, no proportioning valve, no booster change.

 

 

Working with Stoptech again, we developed this smaller BBK as a direct bolt-in solution for the 1970 to 1978 S30 Z cars. We’ve been with Stoptech since the beginning and love their products.  We aim to release this product to the masses once our local installs are completed.  Let’s get back to Glenn and hear his initial impressions of the big-brake kit:

Rob informed me he was working up a solution and he wanted me to be test the brake kit. Rob promised three things – they would brake amazing, they would fit under my 15” Watanabes, and they would feel as if they belonged on the car. Did I doubt it at first? Sure, a little. However, I also knew that the fit and finish of all products that came out of ZCG were top notch, and that Rob thoroughly tested all his products against his own standards. Which I’m sure everyone knows, are extremely high.

In preparation for the Monterey Historics last year, I had brought the Z race car to the shop for dyno time. Rob gave me the keys to his Butters Z and said “Go drive it.” Under 14″ wheels sat his brand new ZCG brake kit. I gladly accepted and took the car for a ride. 

 

 

WOW, what a difference. The feel, modulation, power, sharpness was amazing. Hands down the best brakes I had ever driven on a Z car, and these were on a car with stock suspension, tires and probably cruddy tires! I told Rob, “sign me up!”

Glenn wanted to run the brake kit on his Fairlady and we happily obliged. He had also been gearing up for a road rallye so the braking system would be throughly used. You can see his Z (top left) along with his buddy Erich C’s S30 (top right, also getting a ZCG BBK!):

 

Then came the day Rob called me up and said they were ready to rock and roll. Lucky for me, I was just about to head out on the 1000-mile Coastal Range Rally! The kit came with beautifully anodized front and rear calipers, hats, rotors, brakes lines, reversible brackets (for early and later Z offsets), and a factory ⅞” master cylinder. Read that again… Yes, a proportioning valve was left out from that list! The brakes were a straight bolt on and ZCG did all the math to get both the master cylinder size and piston sizes correct. We brought the car in for install and within a day the car was ready to rock.

 

 

Glenn’s 240z now had 4-wheel disc brakes ready to tackle the street and rallye:

  

And of course, the brakes fit beautifully under the 15″ Watts. Kane approved, and Glenn was stoked:

 

I could hardly wait to jump in the seat of the car and take it for a spin. The brakes were now on a car with suspension, tire, power, and a proper alignment. It was everything I had remembered from driving the Butters Z and MORE. The brakes performed flawlessly on the Coastal Range Rally, taking abuse from California’s most challenging roads:

 

Attention to detail goes a long way. This is exactly what these brakes delivered, and what continues to be delivered by ZCG.

LONG LIVE THE Z!

 

We are happy to report that Glenn is still braking late and still braking deep all while Enjoy The Ride! You can find him carving through the Santa Cruz Mountains:

 

Big thanks to Glenn for letting us work on your Fairlady! We also thank Eric and Tyler from Stoptech for supporting us and our precious Z cars!

 

More pictures in the gallery below!
…[read more]

 

If you tuned in last time to Gary’s Pulsar GTi-R we increased the power with a downpipe and several bolt-on parts:

  

Gary has been commuting and enjoying the newfound power in the Pulsar, but now he wanted to take the “cush” out of the ride. After some research he located BC Racing coil-overs for the RNN14 stateside and visited us for the installation:

 

Here are the coil-overs installed, before/after for the front/rear:

   

A full alignment followed the coil-over installation and we set the ride height so it looked good and handled well. Gary is super stoked!

 

 

 

 

Just 4 days after we listed this 1973 Nissan Kenmeri Skyline it found a new owner in Southern California.

  

The new owner, Joe:

“Just want to say thank to Rob and the guys at Z Car Garage.  Had a great experience purchasing my 73 Skyline Kenmeri from them. Class act all around and I would recommend them to anyone looking for a quality top notch classic JDM car!”

Here is the Kenmeri arriving:

 

The best part is that Joe is already Enjoying The Ride in his Skyline making appearances at local events!

 

Congratulations Joe!

 

***Dear Customers and Friends,  Z Car Garage will be closed from 12/23/16 to 1/2/17***

 

We want to say thanks to our customers, friends and the crew at ZCG for making 2016 a wonderful and productive year!

Read further to enjoy a few highlights from the year and Z you in 2017!

(Click on links to read the full blog post)

 

Z Car Garage on Speedhunters!

 

The Touge California

 

The Japanese Classic Car Show

 

Z Car Garage featured on Hagerty

 

The 2016 SEMA Show

 

Wednesday Night Drags

 

Our OS Giken Powered Datsun 240z on Speedhunters

 

ZCG-built Datsun Roadster on Speedhunters

 

The IMSA 240z on Speedhunters

 

Gary’s Hakosuka Skyline on Speedhunters