We love to see owners installing our Z Car Garage CV Axles in their vintage Nissans and Datsuns. B&T Performance Retro in Thailand is running a set in three of their iconic, right-hand drive cars: a 1971 Skyline 2000GT, Fairlady Z and Kenmeri Skyline:
Z Car Garage is proud to offer a CV axle conversion kit for your Datsun S30 and 510. We have sold over 200 sets of axles globally, with customers installing and enjoying them on everything from street cars to full-blown IMSA racers. These CV axles will help transmit power to the ground and ensure smoother operation compared to your standard half shafts.
For years we have used aftermarket CV axles that utilize an aluminum adapter prone to loosening up over time. Despite efforts to keep things tight (Loctite, hardware changes) we had to keep an eye on them. We developed a better solution that eliminates the need for aluminum adapters and remains 100% bolt-in like a factory half-shaft. These are the beefiest CV axles on the market. They have been tested on the track by our vintage racing customers and also in high hp* street cars. Each axle has a serial # for peace of mind and the kit comes with everything you need to install on your car.
Hakosuka Skyline
This 1971 Nissan Skyline 2000GT-X was restored by B&T Performance Retro featuring a 3.0L L-Series with triple-Weber induction:
We love his motto of “This is built to be driven hard, not just for taking still pictures”. Indeed, this Hakosuka sees regular track time. Enjoy this short video clip of the Hako in action:
Fairlady Z
This RHD FairladyZ features a stroker L-Series with triple-Weber induction and Z Car Garage CV Axles. Like the Hako above, it is also driven in anger:
Kenmeri
B&T Performance Retro also restored this 1973 “Ken and Mary” or “Kenmeri” Skyline. It features a similar-spec’d 3L L-Series and 5-speed transmission with Z Car Garage CV Axles. More photos in the gallery below:
We love seeing our parts installed and enjoyed, thank you B&T Performance Retro for your support! You can see more of their work on Facebook , and read below for more information on our ZCG CV Axles:
ZCG CV Axles
Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. These are 100% bolt-in replacing your half-shafts and does not use aluminum adapters commonly found in aftermarket units. We have over 200+ CV axle kits on customer cars and we are stoked with all of the positive feedback.
For years we have used aftermarket CV axles that utilize an aluminum adapter prone to loosening up over time. Despite efforts to keep things tight (Loctite, hardware changes) we had to keep an eye on them. We developed a better solution that eliminates the need for aluminum adapters and remains 100% bolt-in like a factory half-shaft.
Designed and manufactured locally with KAD Models, the ZCG CV axle kit works in both R180 and R200 configurations.
These are the beefiest CV axles on the market. They have been tested on the track by our vintage racing customers and also in high hp* street cars (powershifting, clutch dumps, etc.). Each axle has a serial # for peace of mind:
The CV axle kit is available now from ZCG for 1595.00 + freight and they come with everything you need to install on your car. Contact us at 408-452-0350 or send Rob an e-mail rob@zcargarage.com to purchase. Installation is just like doing a half-shaft: there is even a marking that shows you where to line up bolts and special hardware:
The ZCG CV Axles in action
The video below demonstrates the “looseness” associated with aftermarket CV axles that use adapters compared to the ZCG axles without adapters. Several customer race/street cars running our CV axles are also shown. Enjoy!
Enjoy this video made by our client Hazel. She installed our ZCG CV Axles on her Hazel’s 1970 Datsun 240Z
Over 200 sets of our ZCG CV Axles are installed in client’s cars all over the world:
Race car driver, restorer and Datsun Historian Glenn Chiou is running our ZCG CV Axles in this IMSA GTU 260z race car!
Racer Brad H is running ZCG CV Axles in his IMSA GTU race car:
Race car driver and restoration specialist Jim Froula of Racecraft is running ZCG axles in several of his cars:Set #246 – installed May 2018 on the “Harry Stewart #52” Datsun 510:
Set #247 – installed April 2018 on the 260z
Set #248 – installed on Adam Carolla’s “Greg Sorrentino #90” Datsun 510.
The shop is busy dyno tuning, servicing and upgrading Z cars. Enjoy this brief update from Friday, December 15th.
S30 Z Cars
Rashid lives in Dubai and his Datsun 240Z is getting 3.2L L-Series with pH44 Mikuni induction and exhaust header, ZX 5-speed transmission, OS Giken 4.11 LSD, Z Car Garage KW coil-over suspension, our Z Car Garage Big-Brakes (Stoptech) and 16″ Panasport wheels:
David’s 1972 Datsun 240Z is getting a Rebello 3.0L, 240SX 5-speed transmission and 4.11 OS Giken LS. It is also getting our Z Car Garage KW coil-over suspension and already has our V1 (328m) Z Car Garage Big-Brakes. Both cars will feature the T3 steering rack that we are big fans of:
Both Ryan and Beau’s Datsun 240Z cars left the shop recently. Ryan’s Z has LS3 V8 power while Beau’s 1976 280Z has an L28 with stock EFI. Both cars feature our Z Car Garage Big-Brakes (Stoptech), Z Car Garage CV Axles, Recaro Specialist seats, A/C and dyno tuning. Full features on both coming to zcarblog.com!
Lou’s Datsun 240Z came in for mechanical sorting. Excited to share his story on zcarblog as Larry also races with us:
Nissan 300ZX (Z32)
We have several Z32 NA and TT cars currently at the shop. Gary’s Twin Turbo (above) just got a new set of BBS LM wheels. Full update on this car soon! Paul Ferrari returned to ZCG since we completed his Epic Z32 Build in 2017. He’s ready for ethanol, after running this car on race fuel for many years. We will be installing dual fuel pumps, BDE top fuel rail and all the fixings:
Kevin’s Slicktop Z32 is in for a driver’s side window replacement and some touch-up. Love this Z with WORK wheels and Stoptech Big-Brakes:
Hakosuka Skyline
Sebastian’s Skyline is at the shop and we are doing a suspension refresh, engine work adapting our Z Car Garage Big-Brakes (Stoptech) to this Hako. We hope to offer this in the future for C10 clients. We hope you enjoyed this shop update, stay tuned for more on zcarblog.com and LONG LIVE THE Z!
Z Car Garage specializes in dyno tuning of vintage cars and this includes non-Nissan/Datsun classics. From establishing a baseline on street cars to preparing race cars for high-profile events we love helping each client achieve the best performance possible. Geoff W’s 1972 BMW 2002 came to Z Car Garage for a dyno tuning session with fantastic results.
Geoff is a friend of the shop with a great story behind his love for all things engineering and automotive. Let’s hear how he got into cars and acquired the BMW 2002…
Generations of Car Enthusiasts
“My father owned Formula Fords growing up and has owned a Lotus Elan since 1977; we spent a lot of time in the garage together in my formative years. I was exposed at a young age to AutoX and vintage racing I distinctly remember falling in love with Lotus Sevens and B-sedan cars. When I was of driving age, I purchased a 1985 Mk1 Toyota Mr2 (Chassis code AW11) and began to do a lot of track days and AutoX. This eventually led to another 4age powered car: The Toyota Corolla GTS (Chassis code AE86). I was going to college in southern California at the time and was involved with Club4ag.com which started holding drift day events. This was before professional organizations such as Formula D came about.”
“As a poor college kid, I started working drift events and track days in exchange for track time. I eventually became an instructor and won one of the earliest US drifting competitions in my largely-stock, daily-driver Corolla. After school, I bought a Caterham 7 Super Sprint, and while it was fun, it was never quite the original Lotus Seven I pined for. I eventually sold all of my “fun cars” to fund a house purchase in San Jose. After a few years, I finally acquired my Lotus Seven in 2013 as a tired vintage race car from Texas. I built a road-going motor and installed a synchromesh transmission for the car and finally got it running a year later.”
“I’ve been enjoying driving and developing it in the years since. Alvin from Z Car Garage and I met a few years after this car was finished and we became fast friends. Some of my best memories with this car have been spent driving in the mountains surrounding San Jose with Alvin. I’ve done a few vintage car rallies and been on track with it, but I eventually would like to do some vintage racing.” (See Geoff’s Lotus 7 in this excellent Petrolicious feature HERE)
The Inka Orange 1972 BMW 2002
“In 2018, I sought out a B-sedan road car to take on vintage car rallies and have something fun to drive in inclement weather. Alfa GTV’s, Datsun 510’s were out of my price range and I couldn’t find any Mk1 Ford Escorts/Cortinas for sale. I began looking at BMW 2002’s; I especially liked them in bright/interesting colors popular in the early 70’s.”
“When I bought this car, the previous owner didn’t know much about the engine. It had a pair of Weber 40dcoe’s, ran well, and seemed to feel like other stock bmw 2002s I had driven. I haven’t made many changes to the car, but did locate and install a set of rare and period correct Campagnolo wheels. Earlier this year, I found and purchased a Mk1 Cortina and I was going to sell the BMW 2002 because it wasn’t as exciting to drive.”
Dyno Tuning
The 2002 baselined at 99hp/114tq and after tuning put down 129hp/127tq at the wheels! Let’s hear from Rob…
ROB: “Being around so many B-Sedan race cars I wanted to see what all the hype was surrounding the BMW 2002. I started talking with Geoff about trading one of my S30 Z cars for his BMW. He kindly lent it to me, and I drove it to the Monterey Historics to root on our friend Jim Huff in his Neu Klasse BMW. First impressions were that it was anemic and the dyno confirmed this. Full-throttle was compromised so it needed throttle-linkage adjustment plus timing and jetting. It really came alive making great power…“
Enjoy the video below to see Geoff’s BMW on the dyno, test driving with Rob and enjoying a few road rallies:
Hold on to that 2002!
Rob and Geoff recall how they felt about the 2002 post dyno tuning and test driving:
ROB: “With +30hp/13tq this BMW was born again, and man did I like the German 510. Love the visibility, greenhouse, seats, thud of the door closing. Despite being a die-hard Datsun 510 guy I really dug the 2002. Enjoyed it so much that I thought maybe this was going to be my first German car. I drove it, Meghan drove it, and just as I was getting excited, (un)fortunately Geoff finally drove it…our improvements to the car convinced him to keep the 2002.”
GEOFF: “I hadn’t even considered having it tuned, but Rob suggested giving it a try. When I drove the car after Z Car Garage worked their magic, I was absolutely floored. It is a completely different car now, gaining 30 horsepower and this was not the “stock” 2002 I had assumed it to be. I’m absolutely kicking myself I didn’t have it tuned by Rob earlier. Needless to say, I am no longer interested in selling it. I feel like I’m experiencing a whole new car I cannot thank Z Car Garage enough!”
On Datsuns:
We introduced Geoff to the magic of the Datsun S30 Z car after joining him on local mountain drives and rallies. He gets it…
GEOFF: “Being around the shop, I have an even stronger strong appreciation for both 510’s and Z cars. I was recently given the opportunity to drive Mrs. Butters and was completely blown away by the Z Car Garage Big Brakes. I have never felt brakes like that on a vintage car; they’re more impressive than most modern cars! The sound of that L-series on triple Mikuni’s is absolutely intoxicating. While I’ve always preferred smaller/lighter 4 cylinder cars, a S30 tuned like Mrs. Butters is definitely on my short-list of next cars to own. It also helps to have a reputable shop so familiar with these cars in the area!”
Friendship
ALVIN:“It really is a small word. Geoff and I both work at the same company and didn’t meet until we saw our beloved vintage cars featured in Petrolicious. Since then we’ve enjoyed Bay Area backroads and beyond. Good times from running rallies with Driving While Awesome, to attending race events and weekend blasts. Geoff is truly someone I’d wish I had known earlier in life. Here’s to more memories and drives.”
Just a few events we have enjoyed with Geoff over the years, with more photos in the gallery below:
ROB: “Happy to help Geoff sort out his BMW. He’s such a great car enthusiast and friend to the shop, myself and Alvin. Wonderful 2002. B-Sedans are not just Datsun 510s, they are in the form of BMWs, Alfas and other marques!”
Dyno tuning for your vintage car
Z Car Garage specializes in dyno tuning vintage/classic street and race cars. Here is just a sample of the variety: (above) Team TRUST Porsche 962 from Canepa, Toyota Celica GTO, DeKon Monza, Shelby Mustang and more. Contact Rob at the shop to schedule your dyno session!
Happy Thanksgiving from all of us at Z Car Garage! We hope you can find time to Enjoy The Ride over the holidays. Please note we will be closed today and Friday 11/24.
Yousef purchased a set of Panasport Wheels from Z Car Garage that we shipped to Saudi Arabia. We are an authorized Panasport dealer and have limited sets available for fitment on your S30 Z car. Before we show you how a set of these 16×7 wheels look on almost every Z color imaginable, enjoy these shots of Yousef’s Series 1 S30 featuring a 3.1L ITB EFI L-Series engine. Full story coming to zcarblog.com soon!
Panasport wheels for your Z car
Treat your Z to a brand new set of Panasport wheels! We special order this offset to enable fitment of a 225/50/16 tire on the 1970 to 1978 S30s.
Contact us: rob@zcargarage.com or call 408-452-0350 Limited availability (pallet pictured)
Wondering how a set of Panasports would look on your Z car? Please enjoy pictures below of ZCG customer cars in jus about every color imaginable with Panasport wheels:
