Raceworz is August 12. This is an annual event held at Sacramento Raceway which allows both show and drag racing competitions!

 

We are proud to be a sponsor of the 13th Annual 2017 Japanese Classic Car Show September 23! The JCCS is a J-Tin lover’s paradise and it keeps getting better every year. Take a look at the poster above and you might notice a familiar black Z car. This year our OS Giken TC24 powered 1971 Datsun 240z will be displayed as one of the featured show cars, from the press release:

 

“America’s Most Exotic 240z” does have a nice ring to it!  You can see the original article by Mike Garrett over at Speedhunters HERE.

 

 

Z Car Garage will have its own booth at the show, so please stop by, check out the Z and say hello!

                    ***JCCS registration opens Saturday, July 1.***

 

Registration open tomorrow, July 1, so get those applications in and Z you at the show!

In case you missed it, our coverage of last year’s JCCS show is HERE and you can see a brief history of the TC24B1Z powered 240z below:

 

Over 30 years ago OS Giken created the first dual overhead cam (DOHC) 24-valve cylinder head for the Nissan L-series engine: The TC24-B1Z.

 

Z Car Garage in partnership with OS Giken debuted the first North American (LHD) Datsun 240z to run the TC24-B1Z at the SEMA show in Las Vegas, CA:
ZCG at SEMA 2015

We want to share how this mythical cylinder head sounds, looks and drives.
Turn up your speakers and enjoy!

 

 

 

We met Rich G when he called us about the suspension on his 2011 G37 Sport Coupe.  After visiting a wheel shop to get new wheels/tires installed he reported the car was bottoming out and felt very unstable. Rich sought out a specialist (sound familiar?), called ZCG and met with Rob to assess the car. We put the G up on the rack and noticed installation of very aggressive H&R lowering springs. The springs and aggressive wheel/tire fitment made the car bottom out and also cause excessive camber wear.

 

We immediately changed the springs to a set of Eibach progressive rate units which are fantastic for a car that just wants to be slightly lower and enjoyed as a daily driver.

   

The wheels were wrapped in new Hankook v12 evo S2 tires and SPC  F/R control arms help keep the suspension properly aligned. The G still has a nice stance:

 

Rich’s son is a younger fellow and removed the rear muffler so we put it back on for Rich. If you are going to wear tires like an adult sports car…it might as well sound like one too:) After the G was sorted we heard from Rich a few weeks later and he was super stoked with the way the car rides.  He was also happy to report perfect tire wear too.

  

So here we have another great example of the specialty shop working for you! Enjoy The Ride, Rich!

Are you ready for the greatest event during the Monterey Car Week in August? The Rolex Monterey Motorsports Reunion is 8/17-8/20 and you don’t want to miss it! There will be several iconic Datsun race cars and your favorites from the 60s to the 90s.

 

Our friends at ZONC have arranged for a NISSAN corral to park your car close to the track and avoid the madness(and distance) of general parking:

 

To purchase tickets for the race and Nissan Corral Parking, please visit:
http://www.mazdaraceway.com/rolex-monterey-motorsports-reunion

Check out our past coverage of this awesome event HERE

Hello Zcarblog readers! In our next blog posts we aim to demonstrate the importance of a specialty shop for your Nissan/Infiniti/Datsun.

Let’s begin with Justin L’s 2013 370z. He had a Stillen supercharger installed at a local shop and while there are many competent shops that can get your car ready to go, the specialist exists for a reason: we have become proficient at specific installations because the are part of our daily routine.

 

The Stillen supercharger kit for the Z34 is an install we are intimately familiar with, and as a result we corrected several things on Justin’s car including engine codes and a fuse in the intercooler pump system that wasn’t allowing water to be pumped into the IC.  We also adjusted the clutch pedal and crossed the T’s and dotted the I’s as we do for many folks that bring their cars to ZCG.

Rob tuned the car using Ecutek software flashing with a MAP sensor instead of the MAF and Stillen-supplied CAN tunes.  Moving to speed density allows more control improved driveablity from idle to on boost. The results were impressive:

 

Justin’s Z came to us with 360hp/291tq and left with 396hp/321tq at the wheels. Gains of 36hp/30tq using slightly less boost as well with gains throughout the entire rev range. Justin is a happy camper and hopefully we’ve gained another customer for life. Long Live The Z!